Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.0099484BTC
In stock
CS Cameron Sino Battery for Bullard T3/T4 Series 9.60V 2000mAh
Replacement 9.60 V 2000 mAh pack fits Bullard T3, T4 and Heiman thermal cameras
- Specifications88.00 x 71.00 x 35.00
- Battery Pack88.00 x 71.00 x 35.00
- Battery Capacity2000 milliamp_hours
- Battery Voltage9.6 volts
- 60 V 2000 mAh capacity powers Bullard T3 and T4 thermal cameras through extended shifts
- 20 Wh energy rating delivers reliable runtime for demanding inspections
- ISO 9001, RoHS and CE certifications confirm manufacturing quality and safety compliance
- 00 × 71.00 × 35.00 mm form factor matches original battery dimensions for direct fit
- 259 g lightweight pack keeps helmet-mounted cameras balanced during long operations
Compatible Thermal Camera Battery
This 9.60 V, 2000 mAh lithium-ion pack replaces the original power source for Bullard T3, T3 Max, T3LT, T3XT, T4 and related thermal camera models. It matches the listed part numbers including BZT3MAX and ACAM0022 for direct compatibility.
Build Quality and Daily Use
The pack measures 88.00 x 71.00 x 35.00 mm and weighs 259 g, fitting the existing battery cavity without modification. A fully decoded chip communicates with the camera exactly like the original unit, while integrated protection guards against overcharge, over-discharge, over-voltage and short circuits. Shock-absorbing foam in the packaging protects the cell during transit.
Pre-Order Checks
Verify the model number on your device and the part number on your current battery against the supported list before purchasing. The replacement reaches peak performance after two or three full charge cycles. Use only a quality charger suited to the 9.6 V chemistry; avoid low-grade third-party adapters. Do not disassemble the pack, expose it to fire or water, or store it above 60 °C (140 °F).
Highlights
- 60 V 2000 mAh capacity powers Bullard T3 and T4 thermal cameras through extended shifts
- 20 Wh energy rating delivers reliable runtime for demanding inspections
- ISO 9001, RoHS and CE certifications confirm manufacturing quality and safety compliance
- 00 × 71.00 × 35.00 mm form factor matches original battery dimensions for direct fit
- 259 g lightweight pack keeps helmet-mounted cameras balanced during long operations
Specifications
| Brand | CS Cameron Sino |
|---|---|
| Model | Bullard T3 T3 Max T3LT T3XT T4 T320T T3MAXWITH TT Heiman T3 T4MAX |
| Part Number | Bullard BZT3MAX ACAM0022 T3NIMH T3NI00688 |
| Specifications | 88.00 x 71.00 x 35.00 |
| Battery Pack | 88.00 x 71.00 x 35.00 |
| Battery Capacity | 2000 milliamp_hours |
| Battery Voltage | 9.6 volts |
Questions about this item
What voltage does the 9.60 V battery deliver to a Bullard T4 thermal camera?
The pack supplies a nominal 9.60 V, matching the original Bullard specification for T3, T3 Max, T4 and T4n models.
Will the 88.00 x 71.00 x 35.00 mm pack fit inside a Bullard T3LT housing?
Yes, those exact dimensions match the OEM battery cavity for the T3LT, T3XT, T320T and T3MAXWITH-TT variants.
How do I install the replacement without damaging the connector pins?
Align the keyed connector, press straight in until it clicks, then secure the latch; forcing it at an angle bends the pins.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
