We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four 1.75mm ochre carbon fiber filament spools in a pack

Creality

Creality Carbon Fiber Filament 4 Pack 1.75mm Ochre 3301060019-4PK

SKU CH-P5FS-E5183

Four 1kg spools of 1.75mm carbon-fibre reinforced filament rated for 50–300mm/s printing with ±0.03mm accuracy

  • TypeProject Lamp
  • Weight8.8000
  • Print up to 300 mm/s with consistent quality
  • 30 % stronger than standard PLA for structural parts
  • Dimensional accuracy ±0.03 mm ensures precise layers
  • 75 mm diameter fits most 3D printers
  • Four 1 kg spools give 8.8 kg total material

1.75 mm carbon-fibre filament pack

This four-spool set of 1.75 mm carbon-fibre reinforced PLA is built for makers who run high-speed printers and need parts that hold up under load. Each spool delivers consistent extrusion at speeds from 50 to 300 mm/s with dimensional accuracy of ±0.03 mm. The ochre colour gives a distinctive finish for functional prototypes and end-use components. It suits workshops that value strength and speed over decorative detail.

Mechanical boost over standard PLA

The carbon-fibre fill raises flexural strength and impact resistance by 30 percent compared with ordinary PLA, so printed brackets, drone arms and jigs survive handling and vibration better. Stiffness increases without adding weight, keeping moving assemblies light. Surface texture stays smooth even at the top of the speed range, reducing post-processing time. The material is not suited for high-temperature environments or food-contact applications.

Direct drop-in for most bowden

The filament feeds reliably on Creality K1C and on the majority of printers that accept 1.75 mm spools, with no hardware changes required. Hardened nozzles are recommended because the abrasive fibres wear brass tips quickly. Moisture absorption can cause brittleness, so store spools sealed with desiccant and dry before long prints. First-layer adhesion improves with a textured PEI sheet or a thin glue-stick layer.

Highlights

  • Print up to 300 mm/s with consistent quality
  • 30 % stronger than standard PLA for structural parts
  • Dimensional accuracy ±0.03 mm ensures precise layers
  • 75 mm diameter fits most 3D printers
  • Four 1 kg spools give 8.8 kg total material

Specifications

BrandCreality
ModelCreality-PLA-CF-Ochre-3301060019-4PK
Part NumberCreality-PLA-CF-Ochre-3301060019-4PK
TypeProject Lamp
Weight8.8000

Questions about this item

How often will I need to replace the nozzle when printing with this carbon-fiber filament?

Carbon-fiber material is abrasive and will wear a standard brass nozzle faster than plain PLA; plan to swap to a hardened-steel nozzle and inspect it every few kilograms of extrusion.

What print speed limit appears first during long, continuous runs?

The filament is rated for up to 300 mm/s, but sustained high-speed printing is usually limited by the printer’s cooling capacity and hot-end melt rate rather than the material itself.

Does the filament produce more heat or odor during all-day printing sessions?

It prints at typical PLA temperatures and does not emit strong fumes, though the carbon-fiber content may cause slightly more particulate release, so good ventilation is still recommended.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.