We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular air purifier with front touch panel and PM2.5 display

Creality

Creality Air Purifier FDM 4008030110 250m³/h 1000h DLP Replacement Lamp

SKU CH-7M8E-2CZ92

Filters 3D printer fumes with HEPA and carbon at 250 m³/h, shows PM2.5 levels, runs 1000 hours per filter

  • TypeProject Lamp
  • Weight34.0000
  • HEPA and activated carbon filter reduces FDM print odors and particles
  • 250m³/h airflow provides 360° purification around the printing area
  • Real-time PM 2.5 display lets you monitor air quality at a glance
  • Smart touch control panel simplifies operation during printing sessions
  • Filter rated for up to 1000 hours of continuous use

FDM 3D printer air filtration

The Creality Air Purifier FDM Version 4008030110 is designed for filament-based 3D printing environments such as workshops, classrooms and small print farms. It helps reduce airborne particles, micro-dust, print odours and VOC-related fumes from common FDM materials including PLA, PETG, ABS, ASA, TPU, nylon and carbon fibre-filled filaments. The unit provides dedicated filtration support for hobbyists, educators and professional users.

250m³/h airflow with PM2.5 monitoring

Up to 250m³/h airflow and 360° all-round purification support efficient air movement during short jobs, long prints and multi-printer workflows. A real-time PM 2.5 display lets you monitor air quality at a glance. The smart touch control panel makes operation simple and convenient for daily use.

HEPA and carbon filter up to 1000 hours

The composite filter combines HEPA media and activated carbon to capture fine particles while reducing odours around your 3D printer setup. The long-life filter design provides up to 1000 hours of use before replacement is needed. Buyers who need filtration for resin-based SLA or DLP printing processes should verify compatibility separately.

Highlights

  • HEPA and activated carbon filter reduces FDM print odors and particles
  • 250m³/h airflow provides 360° purification around the printing area
  • Real-time PM 2.5 display lets you monitor air quality at a glance
  • Smart touch control panel simplifies operation during printing sessions
  • Filter rated for up to 1000 hours of continuous use

Specifications

BrandCreality
ModelCreality-Air-Purifier-FDM-4008030110
Part NumberCreality-Air-Purifier-FDM-4008030110
TypeProject Lamp
Weight34.0000

Questions about this item

How do I install the Creality Air Purifier FDM 4008030110 and which step do people miss?

Place the unit near the 3D printer so the 360° intake can draw air freely, plug it in, and press the smart touch panel to start; the step people miss is removing the protective wrap from the HEPA + activated carbon composite filter before first use.

What maintenance will the Creality Air Purifier FDM 4008030110 need later?

Replace the composite filter after roughly 1000 hours of operation; the real-time PM2.5 display will show rising particle levels when the filter is saturated, signalling it is time for a new cartridge.

What limit appears first during a long print session with the Creality Air Purifier FDM 4008030110?

The 250 m³/h airflow ceiling is reached first; once the fan hits maximum speed it cannot move more air, so very large or heavily loaded enclosures may still show elevated PM2.5 readings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.