Cox
Cox 63006-600 600 mL Sausage Pack Caulk Gun Pneumatic Components Power
Pneumatic caulk gun for 600 mL sausage packs delivers 326 lb thrust at up to 100 psi and 82 dB sound level
- Handles 600 mL sausage packs for high-volume sealing
- Operates at 0–100 psi air pressure range
- Delivers 326 lb thrust ratio for strong extrusion
- Runs at 82 dB sound level for quieter use
- Connects via 1/4 in male NPT air inlet
Cox 600 mL Sausage Pack Caulk Gun
The Cox 63006-600 is a pneumatic caulk gun designed for 600 mL sausage pack containers. It features an enclosed frame style and operates on compressed air supplied through a 1/4 inch male NPT inlet. The tool delivers a thrust ratio of 326 lb and produces a sound level of 82 dB during operation. It is built for professional dispensing of sealants and adhesives.
Ideal for high-volume sealing tasks.
This gun suits tradespeople who regularly apply bulk sealant from 600 mL sausage packs and have a compressed air system capable of 100 psi. The enclosed frame protects the pack and the high thrust ratio handles thick materials. Buyers who only use standard cartridges, lack an air compressor, or need a cordless or manual tool should look at something else.
Verify air supply and pack compatibility before
Ensure your compressor can deliver between 0 and 100 psi at the tool and that you have a 1/4 inch female NPT fitting for the air inlet. Confirm that your sealant is supplied in 600 mL sausage packs, as this gun does not accept cartridges or other pack sizes. Check that 82 dB noise levels meet your workplace requirements.
Highlights
- Handles 600 mL sausage packs for high-volume sealing
- Operates at 0–100 psi air pressure range
- Delivers 326 lb thrust ratio for strong extrusion
- Runs at 82 dB sound level for quieter use
- Connects via 1/4 in male NPT air inlet
Specifications
| Brand | COX |
|---|
Questions about this item
What air supply and hose fitting do I need to run this 600 mL sausage-pack gun?
Connect a compressed-air line regulated between 0 and 100 psi to the 1/4 in male NPT air inlet on the gun.
Will my existing 1/4 in NPT quick-connect coupler work with the 1/4 in male NPT inlet on this gun?
Yes, any standard 1/4 in female NPT quick-connect or hose fitting will thread directly onto the gun's male NPT inlet.
How can I confirm the gun is delivering the rated 326 lb thrust after I hook it up?
Set the regulator to 100 psi, trigger the gun, and verify smooth, steady extrusion from a 600 mL sausage pack without stalling or excessive noise near 82 dB.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
