Corrosionx
CorrosionX 94004 corrosion inhibitor lubricant 1 gal jug
Corrosion inhibitor lubricant with a wet film that protects metal indoors and out, works from –10 °F to 200 °F, and meets ASTM B117, D1748, D4175, D877 and MIL-PRF-81309F in a one-gallon jug
- Operates down to -10 °F in cold environments
- Withstands heat up to 200 °F without breaking down
- Mineral-oil base with zero VOC content
- Meets ASTM B117, D1748, D4175 and D877 standards
- Qualified to MIL-PRF-81309F for military-grade protection
Corrosion Inhibitor for Metal Protection
CorrosionX 94004 is a mineral-oil based corrosion inhibitor that leaves a wet lubricant film on metal surfaces. It is suited for maintenance technicians and industrial shops that need to protect equipment from rust during storage or operation. The one-gallon jug provides enough volume for repeated application on large or multiple components. It meets ASTM B117, D1748, D4175, D877 and MIL-PRF-81309F test standards.
Thermals and Power Draw in Normal Use
The fluid remains stable from minus 10 degrees F up to 200 degrees F, so it does not break down in typical indoor or outdoor environments. Its specific gravity of .87 and zero VOC content mean it adds minimal mass and releases no volatile compounds during routine handling. Flash point is 212 degrees F, giving a wide safety margin for ambient-temperature workshops.
Behaviour Under Sustained Load
Medium indoor and outdoor life expectancy ratings indicate the film continues to resist corrosion during extended exposure rather than only in short bursts. Moderate removability allows the coating to be cleaned off when parts return to service without aggressive solvents. The mineral-oil base maintains lubricity and barrier performance through repeated thermal cycles and mechanical contact.
Highlights
- Operates down to -10 °F in cold environments
- Withstands heat up to 200 °F without breaking down
- Mineral-oil base with zero VOC content
- Meets ASTM B117, D1748, D4175 and D877 standards
- Qualified to MIL-PRF-81309F for military-grade protection
Specifications
| Brand | CORROSIONX |
|---|
Questions about this item
How do I apply the 1 gal jug of CorrosionX 94004 and what step do users often miss?
Pour or brush the mineral-oil fluid onto clean metal; the step most often missed is removing old residue first so the wet film can bond at its 0.87 specific gravity.
What maintenance or replacement will the CorrosionX 94004 film need over time?
The medium indoor and outdoor life expectancy means you will need to wipe off the moderate-removability film and reapply once the protective layer wears thin.
At what temperature limit does the CorrosionX 94004 fluid break down first during sustained use?
The flash point of 212 Degrees F is the first limit reached; above that temperature the mineral-oil base can ignite, ending effective lubrication.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
