Corrosionx
CorrosionX 91002 Corrosion Inhibitor Lubricant 16 oz 200°F
Corrosion inhibitor spray with a wet lubricant film, mineral-oil base, 16 oz capacity, and 200 °F maximum operating temperature
- Prevents rust with ASTM B117 salt-spray validation
- Lubricates moving parts up to 200 °F operating temperature
- Mineral-oil base with zero VOC content for cleaner use
- 16 oz spray bottle allows targeted application
- Meets MIL-PRF-81309F military specification for corrosion protection
Purpose and user
CorrosionX 91002 is a mineral-oil based corrosion inhibitor and wet lubricant film supplied in a 16 oz spray bottle. It suits maintenance technicians and machine-shop operators who need a fluid that resists rust and reduces friction on metal surfaces in moderate indoor or outdoor environments.
Build integration
The spray format allows direct application to chains, slides, bearings and fasteners without disassembly, freeing up time otherwise spent on brushing or dipping. It operates from -10 degrees F up to 200 degrees F, so it stays effective across seasonal temperature swings. The fluid meets ASTM B117, ASTM D1748, ASTM D4174, ASTM D877 and MIL-PRF-81309F, confirming salt-spray, humidity and dielectric performance for equipment that must comply with those standards.
Sustained behaviour
With a specific gravity of 0.87 and zero VOC content, the film remains stable during extended runs without thickening or evaporating aggressively. A flash point of 212 degrees F provides a safety margin when components warm under continuous load. Moderate removability means the coating can be cleaned off with standard solvents when scheduled maintenance calls for fresh lubricant.
Highlights
- Prevents rust with ASTM B117 salt-spray validation
- Lubricates moving parts up to 200 °F operating temperature
- Mineral-oil base with zero VOC content for cleaner use
- 16 oz spray bottle allows targeted application
- Meets MIL-PRF-81309F military specification for corrosion protection
Specifications
| Brand | CORROSIONX |
|---|
Questions about this item
At what temperature does the 16 oz spray lose its protective film under continuous heat?
The lubricant is rated to 200 degrees F maximum operating temperature, beyond which the wet film may break down.
Does the mineral-oil base produce fumes or residue when the can runs all day in a 200°F environment?
VOC content is 0 percent and flash point is 212 degrees F, so fumes and flammable vapour are minimal at the rated limit.
Which metal surfaces or pre-treatments are required before spraying the 91002 inhibitor?
The product meets ASTM B117, D1748, D4174, D877 and MIL-PRF-81309F, indicating compatibility with bare and painted metals without mandatory primers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
