Cordless Soldering Iron Kit 3000mAh USB-C 392-842°F 10W
Cordless soldering pen with 3000mAh battery, 7-second heat-up, adjustable 392–842°F range, and USB-C charging
- Watts10 watts
- 3000mAh USB-C battery enables cordless repairs anywhere
- 7-second heat-up melts solder fast for efficient work
- 392°F–842°F adjustable temperature with LED display for precise control
- Auto sleep after 15–20s idle and 15-minute shut-off saves power
- Three precision tips included for detailed PCB and electronics tasks
Portable Soldering Kit for Field Repairs
This cordless soldering iron kit targets technicians and hobbyists who need a heated tip away from a mains outlet. A 3000 mAh battery and USB-C charging let the tool operate at a workbench, in a vehicle or on a job site without a trailing cable. The package includes three precision tips for fine electronics work.
Sustained Use With Auto Sleep
A ceramic heating core reaches working temperature in seven seconds and maintains the set point between 200 °C and 450 °C during continuous joints. After fifteen to twenty seconds of inactivity the iron enters sleep mode, preserving charge, and powers off completely after fifteen minutes. The 10 W output limits the tool to smaller joints rather than heavy copper planes.
Upgrade From Butane or Mains-Only Irons
Users moving up from butane irons gain repeatable digital temperature control and no fuel refills. Builders replacing a tethered station gain mobility for quick repairs, though the 10 W rating means the kit cannot substitute a high-wattage bench unit for large ground planes or thick connectors.
Highlights
- 3000mAh USB-C battery enables cordless repairs anywhere
- 7-second heat-up melts solder fast for efficient work
- 392°F–842°F adjustable temperature with LED display for precise control
- Auto sleep after 15–20s idle and 15-minute shut-off saves power
- Three precision tips included for detailed PCB and electronics tasks
Specifications
| Watts | 10 watts |
|---|
Questions about this item
Does the 10 W ceramic core stay cool enough for long sessions?
The 10 W ceramic heating core reaches temperature in 7 seconds and the iron enters sleep mode after 15 to 20 seconds of inactivity, limiting heat build-up during extended use.
What power source must I have ready to recharge the 3000 mAh battery?
A USB-C cable and any standard USB power adapter or port are required to recharge the built-in 3000 mAh battery.
Will the three included precision tips handle the same 392 °F to 842 °F range as my old bench station?
Yes, the three precision tips operate across the full adjustable range of 392 °F to 842 °F (200 °C to 450 °C) shown on the LED display.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
