We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cooper Atkins 1075 stainless steel puncture temperature probe with 6 ft polyurethane cable

Cooper Atkins

Cooper Atkins 1075 Puncture Temp Probe -40 to 300 Deg F measurement tool

SKU CH-GS5W-S144W

Puncture temperature probe with a thermistor sensor measures -40 to 300 degrees Fahrenheit in liquids, solids and semi-solids

  • TypeEnvironmental & Mechanical
  • Wide -40 °F to 300 °F range covers deep freeze to high heat
  • 10 000 ohm thermistor sensor gives stable resistance-based readings
  • 6 ft polyurethane cable reaches into tanks or ducts with flexibility
  • Stainless steel puncture tip penetrates liquids solids and semi-solids cleanly
  • Rated to 149 °C for demanding industrial and food-service environments

Cooper Atkins 1075 Puncture Probe

The Cooper Atkins 1075 is a puncture temperature probe built for professionals who need accurate internal readings in liquids, solids and semi-solids. Its thermistor sensor delivers a 10,000 ohm resistance across a range of -40 to 300 degrees F or -40 to 149 degrees C. The stainless steel construction resists corrosion during repeated insertion into food, chemical or industrial media.

Six-foot polyurethane cable for bench integration

A 6 ft polyurethane cable connects the probe to compatible meters or data loggers, giving enough reach to keep the readout away from heat, steam or splash zones. The flexible jacket resists oils and abrasion while routing through tight ports or around equipment. No additional mounting hardware is required; the probe inserts directly into the material under test.

Ready for immediate measurement tasks

The probe ships as a complete sensing element with cable attached, so technicians can begin logging temperatures without sourcing separate leads or connectors. The thermistor output works with instruments designed for 10,000 ohm sensors, eliminating the need for signal conditioning modules. No software or calibration certificates are bundled with the unit.

Highlights

  • Wide -40 °F to 300 °F range covers deep freeze to high heat
  • 10 000 ohm thermistor sensor gives stable resistance-based readings
  • 6 ft polyurethane cable reaches into tanks or ducts with flexibility
  • Stainless steel puncture tip penetrates liquids solids and semi-solids cleanly
  • Rated to 149 °C for demanding industrial and food-service environments

Specifications

BrandCOOPER ATKINS
TypeEnvironmental & Mechanical

Questions about this item

How does the thermistor sensor respond when left in a 300 °F liquid all day?

The probe is rated to 300 °F and the thermistor element is designed for continuous immersion, so sustained exposure at the top of the range stays within its specified limits.

Does the polyurethane cable get hot or stiff after hours at 149 °C?

The 6 ft polyurethane cable is rated for the same temperature span as the probe, so it remains flexible and does not overheat during extended use at 149 °C.

What meter input is needed to read the 10,000 ohm thermistor output?

A handheld thermometer or data logger with a 10,000 ohm thermistor input and a phono plug socket will read this probe directly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.