We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black garden hose with brass fittings on both ends

Continental

Continental 20582671 Garden Hose 5/8" ID 50 ft Black

SKU CH-D89Z-8S9RJ

Black EPDM garden hose, 50 ft long with 5/8 in. inside diameter, 130 psi working pressure and brass fittings

  • EPDM tube and cover resist chemicals and weather
  • 130 psi working pressure handles demanding water tasks
  • 390 psi burst pressure with 3:1 safety factor
  • Spiral fiber reinforcement adds strength and kink resistance
  • Brass fittings on both ends ensure secure connections

5/8" ID garden hose for general watering

The Continental 20582671 is a 50 ft black garden hose with a 5/8 in inside diameter and 15/16 in outside diameter. It uses EPDM for both the tube and cover, reinforced with a spiral fiber layer. Brass fittings on both ends complete the assembly for standard residential or light commercial watering tasks.

Brass fittings and spiral reinforcement change

Brass fittings on both 5/8 in ends resist corrosion and thread damage better than plastic alternatives. The spiral fiber reinforcement distributes internal pressure evenly, supporting a 3:1 safety factor. EPDM tube and cover materials handle weather exposure and a temperature range of -40 to 160 degrees F without cracking.

130 psi working pressure covers most municipal

At 70 degrees F the hose is rated for 130 psi maximum working pressure, well above typical household supply pressure. Burst pressure reaches 390 psi, providing headroom for pressure spikes. A 6 1/4 in bend radius allows tight routing around corners, though very sharp bends or sustained pressure above 130 psi will exceed the design limits.

Highlights

  • EPDM tube and cover resist chemicals and weather
  • 130 psi working pressure handles demanding water tasks
  • 390 psi burst pressure with 3:1 safety factor
  • Spiral fiber reinforcement adds strength and kink resistance
  • Brass fittings on both ends ensure secure connections

Specifications

BrandCONTINENTAL

Questions about this item

How often should the EPDM tube and cover be inspected for wear?

Inspect the EPDM tube and cover before each season and after any kinking or crushing; the material handles -40 °F to 160 °F, so cracking typically appears only after years of UV exposure or repeated over-bending past the 6 1/4 in radius.

What pressure limit is reached first during continuous high-flow use?

The 130 psi maximum working pressure at 70 °F is the operating ceiling; sustained flow above that risks exceeding the 3:1 safety factor before the 390 psi burst rating would ever be approached.

Does the brass fitting assembly add noticeable heat or noise when water runs all day?

Brass fittings conduct minimal heat and produce no mechanical noise; the EPDM hose remains near water temperature even during extended use, and the spiral fibre reinforcement prevents vibration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.