We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel toggle anchor with fixed D-ring, 9-1/4 inch length

Condor

Condor FallTech 49CD28 Moveable Toggle Anchor 9-1/4 in. L personal protective equipment

SKU CH-ZXH0-F3PEP

A reusable alloy-steel toggle anchor with a fixed D-ring for horizontal or vertical push-in installation, rated to 310 lb and 5,000 lb tensile strength under ANSI Z359.1-2007 and OSHA 1926.502

  • Alloy steel construction delivers 5,000 lb tensile strength
  • ANSI Z359.1-2007 and OSHA 1926.502 compliance ensures regulatory confidence
  • Push-in toggle design enables fast horizontal or vertical mounting
  • Fixed D-ring attachment point simplifies single-worker fall protection
  • 310 lb weight capacity supports one worker per system

Moveable Toggle Anchor

The Condor FallTech 49CD28 is a personal protective equipment anchor designed for fall arrest systems. It features an alloy steel construction with a fixed D-ring attachment point and a push-in toggle style for horizontal or vertical mounting orientations.

Single-worker fall arrest

This anchor suits workers who need a reusable tie-off point rated to 310 lb capacity under OSHA 1926.502 and ANSI Z 359.1 -2007 standards. It is not for applications requiring a visual load indicator, integrated mounting hardware, or systems supporting more than one worker simultaneously.

Push-in toggle installation

The anchor installs by pushing the toggle through a prepared opening where it expands to secure the alloy steel body. No mounting hardware is included, so installers must supply appropriate fasteners for the substrate. Misalignment during push-in or use in unrated structures are common installation errors.

Highlights

  • Alloy steel construction delivers 5,000 lb tensile strength
  • ANSI Z359.1-2007 and OSHA 1926.502 compliance ensures regulatory confidence
  • Push-in toggle design enables fast horizontal or vertical mounting
  • Fixed D-ring attachment point simplifies single-worker fall protection
  • 310 lb weight capacity supports one worker per system

Specifications

BrandFALLTECH

Questions about this item

What type of structure must I already have in place to install the 9-1/4 in. push-in toggle anchor?

The anchor is designed for horizontal or vertical mounting into a pre-drilled opening that accepts a push-in toggle, so the structure must provide a suitable hole and sufficient material thickness for the toggle to engage.

Can I connect my existing fall-arrest lanyard to the fixed D-ring on this anchor?

Yes, the anchor includes a fixed D-ring with a 1 3/8 in. diameter that serves as the attachment point for a personal fall-arrest system used by one worker.

How do I verify the anchor is holding correctly after I push it into the mounting hole?

After installation, apply a firm pull on the D-ring to confirm the toggle has fully expanded behind the structure and the anchor does not shift; the anchor meets ANSI Z359.1-2007 and OSHA 1926.502 with a 5,000 lb tensile strength and 310 lb worker capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.