Condor
Condor 437R17 Ball Valve Lockout Red
Nylon ball-valve lockout fits lever handles up to ¾ in. thick and 0.88 in. wide, accepts one 5/16 in. shackle padlock, and withstands –20 °F to 250 °F
- Secures lever-handle ball valves up to 1 in pipe size
- Nylon body withstands -20 °F to 250 °F service range
- Bright red colour identifies lockout points at a glance
- Accepts one padlock with shackle up to 5/16 in diameter
- Fits handle thickness up to 3/4 in and width up to 0.88 in
Ball Valve Lockout for Lever Handles
The Condor 437R17 lockout device fits lever-style ball valves with handle thickness up to 3/4 in and width up to .88 in. It accepts a single padlock with a shackle diameter up to 5/16 in. The nylon body operates from -20 Degrees F to 250 Degrees F and suits pipe sizes from 1/4 in to 1 in.
Red Nylon Body With Single Padlock Point
The bright red colour provides clear visual identification during lockout procedures. Its nylon construction resists cracking across the stated temperature range. The design accommodates exactly one padlock, so it suits isolation points that require individual accountability rather than group lockout.
Maximum Handle Thickness Three-Quarter Inch
This dimension determines whether the clamp will close securely on your specific valve handle. If the lever exceeds 3/4 in thick or .88 in wide, the device cannot be installed properly. Buyers needing to secure larger handles or multiple padlocks per point will need a different solution.
Highlights
- Secures lever-handle ball valves up to 1 in pipe size
- Nylon body withstands -20 °F to 250 °F service range
- Bright red colour identifies lockout points at a glance
- Accepts one padlock with shackle up to 5/16 in diameter
- Fits handle thickness up to 3/4 in and width up to 0.88 in
Specifications
| Brand | CONDOR |
|---|
Questions about this item
Will the nylon body of the 437R17 need replacement after repeated exposure to the 250 degree maximum temperature?
The nylon lockout is rated for continuous use up to 250 degrees F and down to -20 degrees F, so it will not degrade within that range.
What stops the Condor 437R17 from fitting a lever handle thicker than 3/4 inch or wider than 0.88 inch?
The device is designed for a maximum handle thickness of 3/4 inch and a maximum handle width of 0.88 inch; larger handles physically cannot be secured.
Does the red nylon lockout become too hot to touch when the pipe runs at the 250 degree limit all day?
At the 250 degree F maximum temperature rating the nylon will be very hot; insulated gloves are required for handling during sustained high-temperature operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
