We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow zinc-plated alloy steel auto-lock carabiner pear shape 8-1/8 inch overall length

Condor

Condor 16V858 Auto-Lock Carabiner Yellow 8-1/8" traffic safety equipment

SKU CH-KFQC-WF5YJ

Auto-lock pear carabiner in zinc-plated alloy steel rated to 420 lb working load and 5,000 lb tensile strength meeting ANSI Z 359.12 and OSHA 1910.140

  • ColorYellow
  • Auto-lock gate prevents accidental opening during use
  • Zinc-plated alloy steel resists corrosion in outdoor conditions
  • Meets ANSI Z359.12 and OSHA 1910.140 fall-protection standards
  • 420 lb working capacity supports heavy-duty rigging tasks
  • High-visibility yellow colour aids quick identification on site

Auto-Lock Carabiner for Fall Protection

The Condor 16V858 is a pear-shaped carabiner built for fall-arrest and positioning systems used by tower crews, riggers and rope-access technicians. Its double-action twist-lock gate requires two distinct movements to open, reducing the chance of accidental release while working at height. The zinc-plated alloy steel body resists corrosion in outdoor environments.

Double-Action Twist-Lock Gate

The lock type is the single specification that determines whether this connector matches your safety plan. A double-action twist lock meets the ANSI Z359.12 and CSA Z259.12 requirements for self-closing, self-locking gates mandated by OSHA 1910.140. If your site protocol specifies a different gate mechanism — such as a screw-lock or triple-action — this unit will not comply.

420 lb Working Capacity

The carabiner is rated for a 420 lb maximum working load and a 5,000 lb minimum tensile strength, providing a wide margin for dynamic arrest forces. A 2 in gate opening accommodates large-diameter anchor slings, steel D-rings and compatible hardware. It is not suited for loads exceeding the stated working capacity or for permanent fixed rigging where a captive-eye connector is required.

Highlights

  • Auto-lock gate prevents accidental opening during use
  • Zinc-plated alloy steel resists corrosion in outdoor conditions
  • Meets ANSI Z359.12 and OSHA 1910.140 fall-protection standards
  • 420 lb working capacity supports heavy-duty rigging tasks
  • High-visibility yellow colour aids quick identification on site

Specifications

ColorYellow
BrandCONDOR

Questions about this item

How much weight can the 420 lb capacity actually support in a fall-arrest system?

The 420 lb working capacity is the maximum user weight allowed when the carabiner is used in a personal fall-arrest system that meets ANSI Z359.12 and OSHA 1910.140 requirements.

What does the double-action twist lock gate actually prevent during use?

The double-action twist lock requires two distinct motions to open, reducing the chance of accidental gate release caused by vibration or contact with structures while the 2 in gate opening stays closed.

Will the 8-1/8 in overall length fit through standard anchor points on a harness?

With a 7-1/2 in inside length and 3-7/8 in inside width, the pear-shaped body clears most harness attachment points and lanyard eyes while the zinc-plated alloy steel resists corrosion.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.