We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised steel pole-top mount with stand-off bracket for 8 to 11 inch poles

COMMSCOPE

COMMSCOPE SCPTW Small Cell Pole Top Mount with Stand-off Bracket 8-11in OD

SKU CH-SPKJ-42C5N

Pole-top mount with 37 in stand-off bracket fits 8 in to 11 in OD poles using hot dip galvanized steel

  • Mounts securely on 8 in to 11 in OD poles
  • Stand-off bracket provides 37 in clearance from pole
  • Hot-dip galvanised steel resists corrosion in outdoor environments
  • Compact 10 in by 10 in footprint fits tight pole-top spaces
  • Supports small cell equipment on wood poles up to 41.2 in height

Pole-top mount for 8–11 in OD poles

This CommScope SCPTW kit mounts small-cell equipment on wooden poles with an outside diameter between 8 in and 11 in. The hot-dip galvanised steel bracket bolts to the pole top and holds the radio at a fixed 37 in stand-off distance. It is sized for utility and municipal crews deploying compact nodes on existing wood infrastructure.

Maximum pole diameter 11 in

The bracket accepts poles from 203.2 mm up to 254 mm OD, so the 11 in upper limit is the single figure that decides fit. If the pole exceeds 11 in the clamps will not close; if it is below 8 in the hardware cannot grip. No other dimension in the spec changes compatibility.

Bolt-on install with supplied hardware

The kit ships as a single each with all mounting bolts included, so a two-person crew can lift the 41.2 in tall assembly and secure it with standard wrenches. The most common issue is uneven pole tops that prevent the bracket from seating flat, which can be corrected with shims before final torque.

Highlights

  • Mounts securely on 8 in to 11 in OD poles
  • Stand-off bracket provides 37 in clearance from pole
  • Hot-dip galvanised steel resists corrosion in outdoor environments
  • Compact 10 in by 10 in footprint fits tight pole-top spaces
  • Supports small cell equipment on wood poles up to 41.2 in height

Specifications

BrandCommScope

Questions about this item

How does the 37 in stand-off distance affect antenna clearance once the mount is on a real pole?

The 37 in stand-off holds the antenna 939.8 mm away from the pole surface, giving clearance for cabling and reducing wind loading on the pole itself.

What pole diameters does the 8 to 11 in mounting range actually accept in practice?

It fits poles from 203.2 mm up to 254 mm outer diameter, covering the stated 8 in to 11 in range.

What are the 10 in by 10 in bracket dimensions for when planning the physical footprint on the pole top?

The bracket measures 254 mm wide by 254 mm long, so the mounting footprint is a 10 in square on the pole top.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.