We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hot-dip galvanised steel pipe, 126 inches long, 2.9 inch diameter, plain ends

COMMSCOPE

COMMSCOPE MT-546-126 2-7/8 OD x 126 Long Plain End Pipe

SKU CH-0FQB-DS1T1

A 126-inch long plain-end pipe with a 2.9-inch outer diameter, made from hot dip galvanized steel and weighing 27.2 kg

  • 126 in length suits tall mast installations
  • 9 in outer diameter fits standard mounts
  • Hot dip galvanized steel resists outdoor corrosion
  • ISO 9001:2015 quality system ensures consistent manufacture
  • 2 kg weight allows single-person handling

CommScope 126 Inch Plain End Pipe

This CommScope MT-546-126 plain end pipe is a structural component built from hot dip galvanized steel. It measures 126 inches in length with a 2.9 inch outside diameter. The pipe weighs 27.2 kilograms and is supplied as a single unit. It is manufactured under an ISO 9001:2015 quality management system.

Installers needing a 126 inch galvanized steel pipe

This pipe suits installers who require a 126 inch length of 2.9 inch diameter galvanized steel tubing for structural runs. Projects that need a different length, a different diameter, or a threaded or swaged end should look at other options. The plain end design requires appropriate couplers or welding for connections.

126 inch length defines the fit

The single specification that decides fit is the 126 inch pipe length. Verify that your structural layout accommodates this exact dimension before ordering. The 2.9 inch outside diameter and hot dip galvanized steel material are fixed attributes of this model.

Highlights

  • 126 in length suits tall mast installations
  • 9 in outer diameter fits standard mounts
  • Hot dip galvanized steel resists outdoor corrosion
  • ISO 9001:2015 quality system ensures consistent manufacture
  • 2 kg weight allows single-person handling

Specifications

BrandCommScope

Questions about this item

What outer diameter does the 126 in plain end pipe present for clamp or bracket fitment?

The pipe outer diameter is 73.66 mm, which is the 2-7/8 in size used for mounting hardware selection.

What are the exact length and weight figures I need to plan handling and support spacing?

Length is 3200.4 mm and net weight is 27.2 kg, so two-person lift and proper support intervals are required.

Does the hot dip galvanized steel pipe arrive ready to install or is field threading needed for the plain ends?

It ships as plain end pipe with no factory threads; installation uses clamps or couplers, not threaded joints.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.