We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular Li-Po battery pack, yellow and black shrink wrap, EC3 connector visible

Common Sense RC

Common Sense RC Lectron Pro 11.1V 1350mAh 80C Li-Po Battery EC3

SKU CH-0CZC-EQCJE

11.1 V 1350 mAh 80C Li-Po pack with EC3 connector weighs 118 g for extended FPV flight time

  • 1350mAh capacity extends FPV racing flight time
  • 80C discharge rate delivers instant power for competitive maneuvers
  • 1V voltage with EC3 connector fits many FPV racers
  • Lightweight 118g design preserves drone agility and speed
  • Compact 4.16 oz size installs without adding bulk

FPV Racing Power

The Lectron Pro is a 3S lithium-polymer pack built for competitive FPV racers who need instant throttle response. Its 80C discharge rating supports aggressive manoeuvres without voltage sag during high-current draws.

Thermals and Efficiency

The 11.1V chemistry delivers consistent power across the flight envelope while the 118 g mass keeps the airframe light. No active cooling is required and the EC3 connector minimises resistive loss under load.

Upgrade Path

Pilots moving from lower-C packs or heavier batteries gain sharper acceleration and longer usable flight windows. The jump is worthwhile when the airframe can exploit the discharge headroom without exceeding structural limits.

Highlights

  • 1350mAh capacity extends FPV racing flight time
  • 80C discharge rate delivers instant power for competitive maneuvers
  • 1V voltage with EC3 connector fits many FPV racers
  • Lightweight 118g design preserves drone agility and speed
  • Compact 4.16 oz size installs without adding bulk

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the battery and what step do pilots often skip?

Plug the EC3 connector firmly until it clicks, secure the pack with the strap, then balance-charge the 11.1 V 1350 mAh cells before the first flight.

What maintenance will this 80C Li-Po need later?

Balance-charge before every session, store at roughly half charge, inspect for puffing or damaged leads, and retire the pack if capacity drops noticeably.

What limit appears first during a long FPV race with the 1350 mAh pack?

The 1350 mAh capacity sets flight time, so expect the voltage to sag after several minutes of hard 80C discharge, ending the session.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.