Colson
Colson 20PM13 Caster Wheel, TPR, 5 in., 250 lb
Five-inch TPR caster wheel supports 250 lb loads with precision ball bearing and spanner bushing included
- TypeWheelbarrows & Carts
- Supports heavy loads with 250 lb rating
- Smooth rolling on 5 in. rubber wheel
- Durable precision ball bearing reduces friction
- Spanner bushing included for secure axle fit
- Soft 70 Shore A tread protects floors
Colson 20PM13 Caster Wheel, TPR, 5 in., 250 lb
This caster wheel carries a 250 lb load rating and measures 5 inches in diameter with a 1 1/4 inch tread width. It is built for wheelbarrows, hand carts and similar yard equipment that need a single replacement wheel. The rubber tread rates 70 Shore A for a soft ride on rough ground, and a precision ball bearing reduces rolling resistance. A 3/8 inch axle bore accepts the included spanner bushing for a secure fit.
Suited for light-duty yard carts and wheelbarrows
Owners of wheelbarrows or utility carts that require a 5 inch wheel with a 250 lb capacity will find this a direct fit. The soft rubber tread protects lawns and paved surfaces while absorbing vibration on uneven terrain. Buyers who need a higher load rating above 299 lb, a non-marking tread, or a wheel with an integrated bracket should look at other options.
250 lb load rating decides fit
The single specification that determines whether this wheel works is the 250 lb load rating combined with the 5 inch diameter and 3/8 inch axle bore. If your equipment demands a greater capacity or a different axle size, this caster will not perform safely. Match the rating and bore to your cart’s specifications before ordering.
Highlights
- Supports heavy loads with 250 lb rating
- Smooth rolling on 5 in. rubber wheel
- Durable precision ball bearing reduces friction
- Spanner bushing included for secure axle fit
- Soft 70 Shore A tread protects floors
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
What axle diameter does the 3/8 in. bore on this caster wheel require?
The wheel is built for a 3/8 in. axle and ships with a plastic spanner bushing to adapt the bore if needed.
How wide is the hub on this 5 in. TPR caster wheel?
Hub length measures 1 1/2 in., so the mounting bracket or fork must accommodate that width.
Does the precision ball bearing come pre-installed, or must it be pressed in during assembly?
The precision ball bearing is already seated in the wheel core; installation only requires sliding the wheel onto the axle and securing it.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
