Collomix
Collomix KR140HF Compound Stirring Paddle 23 in
A 23 in compound stirring paddle with a 5 33/64 in head and Hexafix quick-disconnect mixes 9.2 gal of high-viscosity epoxy, grout, filler, glue or self-levelling underlayment
- TypeCar
- Mix heavy compounds easily with 9.2 gal capacity
- Hexafix quick-disconnect chuck speeds paddle changes
- 23 in paddle length reaches deep buckets
- 5 33/64 in head diameter blends viscous materials
- Designed for epoxy grouts, fillers and adhesives
Collomix KR140HF Paddle Purpose
The Collomix KR140HF is a single-paddle stirring tool designed for mixing high-viscosity and high-stickiness materials. It handles epoxy grouts, fillers, glues, grouting compounds, self-levelling underlayments and tile adhesive with a 9.2 gal mixing capacity. Professional tilers and flooring installers use it for heavy compound preparation.
Sustained Load Mixing Behaviour
The paddle maintains consistent torque when blending dense, sticky batches without thinning the mixture. Its geometry resists loading up during extended runs with epoxy grouts or self-levelling underlayments. The 23 in length provides leverage for uniform homogenisation throughout the full 9.2 gal volume.
Hexafix Quick-Disconnect Fitting
The Hexafix chuck locks onto compatible Collomix mixers with a quarter-turn action, removing the need for spanners or keys. Debris in the socket can prevent full engagement, so the connection should be cleaned before each use. The 5 33/64 in head diameter requires a bucket wide enough to avoid wall contact.
Highlights
- Mix heavy compounds easily with 9.2 gal capacity
- Hexafix quick-disconnect chuck speeds paddle changes
- 23 in paddle length reaches deep buckets
- 5 33/64 in head diameter blends viscous materials
- Designed for epoxy grouts, fillers and adhesives
Specifications
| Brand | COLLOMIX |
|---|---|
| Type | Car |
Questions about this item
Does the 23 in paddle generate noticeable heat during continuous mixing?
The paddle itself is a passive tool with no motor, so it produces no heat; any warmth comes from the drill motor driving it.
What drill chuck is required for the Hexafix quick-disconnect?
The Hexafix system fits standard hex-shank drill chucks, so a compatible drill with a hex chuck is all you need.
Will the 5 33/64 in head diameter fit my existing 140 mm mixing bucket?
The head measures 5 33/64 in, which is slightly larger than 140 mm, so check your bucket opening before use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
