Collomix
Collomix Concrete Stirring Paddle 23 in WK140HF
Mixes epoxy resin, grout, masonry cement and stucco in batches up to 9.5 gal with a 23 in paddle and Hexafix quick-disconnect chuck
- TypeConcrete Tools
- Hexafix quick-disconnect chuck speeds paddle changes
- Single-paddle design handles medium-viscosity mixes efficiently
- 5 gallon capacity suits larger batch requirements
- 23-inch shaft reaches deep into mixing containers
- Compatible with epoxy resin, grout, cement and stucco
Concrete Stirring Paddle 23 in
The Collomix WK140HF is a single-paddle mixing tool designed for medium-viscosity materials such as epoxy resin, grout, joint cement, masonry cement, and stucco. It handles mixing capacities up to 9.5 gallons and suits low-stickiness applications. Builders and contractors use it for consistent batch preparation on site.
Sustained mixing performance
The paddle geometry maintains steady material flow during extended mixing sessions without overworking the drive motor. Its single-paddle design reduces splatter at operational speeds while keeping heavier compounds in suspension. The medium-viscosity rating ensures reliable throughput for continuous epoxy or cement batches.
Hexafix quick-disconnect fitting
The Hexafix chuck allows tool-free paddle changes on compatible Collomix mixers, cutting setup time between batches. Users must verify their mixer accepts the Hexafix interface before purchase, as standard hex or SDS chucks will not engage. Incorrect chuck matching is the primary cause of installation failure.
Highlights
- Hexafix quick-disconnect chuck speeds paddle changes
- Single-paddle design handles medium-viscosity mixes efficiently
- 5 gallon capacity suits larger batch requirements
- 23-inch shaft reaches deep into mixing containers
- Compatible with epoxy resin, grout, cement and stucco
Specifications
| Brand | Collomix |
|---|---|
| Type | Concrete Tools |
Questions about this item
How much power does the WK140HF draw when mixing epoxy resin grout all day?
The paddle itself draws no power; it is driven by your drill motor, so consumption depends entirely on that tool.
What drill chuck must I already own for the Hexafix quick-disconnect to engage?
The Hexafix system needs a compatible Hexafix chuck or adapter on your drill; a standard 1/2 in keyed or keyless chuck will not accept it.
Will the 23 in paddle reach the bottom of a 9.5 gal bucket I already use for stucco?
At 23 in long it reaches the base of typical 9.5 gal mixing buckets, letting you blend stucco or masonry cement without tilting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
