We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel one-piece clamping collar, silver metallic finish

Climax Metal Products

Climax Metal Products 1C-062-S One-Piece Clamping Collar collectible

SKU CH-AV9A-6V6PG

A stainless-steel shaft collar with a 5/8-inch bore and 1.56-inch clearance diameter, supplied new as a collectible industrial component

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • Stainless steel construction resists corrosion in demanding environments
  • One-piece clamp design ensures secure shaft grip without marring
  • 5/8 inch bore fits standard shaft sizes for easy installation
  • Grade 303 stainless steel provides strength and machinability
  • 56 inch clearance diameter allows smooth rotation clearance

Precision shaft collar for 5/8 inch bores

The Climax Metal Products 1C-062-S is a one-piece clamping collar designed for shafts with a 5/8 inch round bore. Its 303 stainless steel construction suits industrial maintenance, machinery assembly and hobbyist projects where a secure, corrosion-resistant hold is required. The 16 mm collar width provides a compact footprint on the shaft.

Runs clean without lubrication or adjustment

The stainless steel screw and collar body operate without generating noticeable heat or noise during normal power-transmission use. No external power draw is involved and the smooth 1.56 inch clearance diameter avoids snagging on nearby components. The non-threaded bore eliminates galling risk during repositioning.

Single-piece stainless build simplifies mounting

The 1-piece design means the collar slides onto the shaft and locks with one screw, so no alignment of split halves is needed. A 1 5/16 inch outside diameter leaves room for adjacent hardware while the 7/16 inch width keeps the stack height low. Grade 303 material resists shop chemicals and moisture day to day.

Highlights

  • Stainless steel construction resists corrosion in demanding environments
  • One-piece clamp design ensures secure shaft grip without marring
  • 5/8 inch bore fits standard shaft sizes for easy installation
  • Grade 303 stainless steel provides strength and machinability
  • 56 inch clearance diameter allows smooth rotation clearance

Specifications

BrandCLIMAX METAL PRODUCTS
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

How do I install the 1C-062-S clamping collar on a 5/8 in shaft without damaging the 303 stainless steel?

Slide the collar onto the shaft, align it where needed, then tighten the single stainless steel screw until the 1 5/16 in outside diameter grips evenly; over-tightening can distort the 7/16 in wide band.

What maintenance will the 1C-062-S collar need after extended use?

Periodically check the screw torque and inspect the 303 stainless steel surfaces for galling or corrosion; the one-piece design has no moving parts to lubricate or replace.

At what point does the 1C-062-S collar start to slip under continuous load?

The 1.56 in clearance diameter and single-screw clamp rely on friction; sustained vibration or axial force can overcome the holding power of the 7/16 in wide stainless steel band.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.