Cleveland
Cleveland Spiral Point Tap Plug 3 Flutes #4-48 UNF
A cobalt spiral-point tap cuts #4-48 UNF threads with three flutes and a 43/64 in thread length
- Spiral point design pushes chips ahead for smoother threading
- Cobalt construction with Hard Lube coating extends tool life in tough materials
- Three-flute geometry balances strength and chip clearance for reliable cuts
- #4-48 UNF thread with 2B class of fit ensures precise fastener engagement
- Overall length 2 13/64 in and thread length 43/64 in suit standard tapping depths
Spiral Point Tap #4-48 UNF
The Cleveland C96004 spiral point tap cuts #4-48 UNF threads in through holes. Three flutes and a right-hand spiral point push chips forward, reducing clogging in production runs. Cobalt construction with Hard Lube coating resists wear in steel and stainless alloys. Designed for machinists and maintenance technicians who need consistent thread quality.
Practical limits of UNF #4-48 tapping
The 2B class of fit and 75 percent thread engagement require a 2.32 mm drill for proper clearance. Thread length is 43/64 in within an overall length of 2 13/64 in, limiting reach in deep holes. Cobalt substrate handles higher cutting temperatures than high-speed steel but remains brittle under shock loads. Spiral point geometry is unsuitable for blind holes where chips cannot escape forward.
Check your setup before ordering
Verify the workpiece material matches cobalt cutting parameters and that your holder accommodates the tap shank. Confirm the #4-48 UNF specification matches the drawing, as fine-pitch threads are not interchangeable with coarse series. Ensure the drilled hole diameter is 2.32 mm for 75 percent thread height. Blind-hole applications need a bottoming or plug tap with a different flute design.
Highlights
- Spiral point design pushes chips ahead for smoother threading
- Cobalt construction with Hard Lube coating extends tool life in tough materials
- Three-flute geometry balances strength and chip clearance for reliable cuts
- #4-48 UNF thread with 2B class of fit ensures precise fastener engagement
- Overall length 2 13/64 in and thread length 43/64 in suit standard tapping depths
Specifications
| Brand | CLEVELAND |
|---|
Questions about this item
Is the #4-48 UNF size the right choice for the 2.32 mm drill and 75 percent thread engagement?
Yes, the #4-48 UNF tap is designed for a 2.32 mm drill size to achieve 75 percent thread engagement with a 2B class of fit.
What does the 43/64 inch thread length mean when I am tapping a blind hole?
The 43/64 inch thread length is the cutting portion; the spiral point pushes chips ahead so the tap can cut to that depth in a through hole.
How does the UNF thread standard affect the fit with a mating fastener?
The UNF fine-pitch standard combined with a 2B class of fit provides a tighter, more precise fit than coarse threads for vibration resistance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
