Cleveland
Cleveland Screw Extractor 192 No 9 Drill Size 1 1/16 in
Spiral-flute screw extractor for 1-3/4 to 2-1/8 in bolts, carbon steel, 4-5/8 in overall length, square drive
- TypeScrew Extractors
- Removes damaged bolts 1-3/4 to 2-1/8 in
- Spiral flute design grips broken fasteners securely
- Carbon steel construction resists wear during extraction
- Square drive 1-17/64 in fits standard wrenches
- Drill size 1-1/16 in prepares hole for removal
Cleveland Screw Extractor 192 No 9
This Cleveland screw extractor model 192 number 9 is a spiral flute tool made from carbon steel. It removes damaged right-hand threaded bolts ranging from 1 3/4 in to 2 1/8 in. The extractor has an overall length of 4 5/8 in and a square drive measuring 1 17/64 in. Professional mechanics and maintenance technicians use it for heavy-duty fastener removal.
Suits heavy bolts with square drive access
This extractor suits technicians removing large right-hand bolts where a 1 17/64 in square drive fits. It is not for left-hand threaded fasteners. It is not for bolts smaller than 1 3/4 in or larger than 2 1/8 in. Buyers needing a different drive type or smaller bolt range should look at other extractor sizes.
Drill size 1 1/16 in required
The single specification that decides fit is the required drill size of 1 1/16 in. You must drill the damaged bolt to this exact diameter before inserting the extractor. Using a different drill size will prevent the spiral flutes from gripping properly and the tool will fail to remove the fastener.
Highlights
- Removes damaged bolts 1-3/4 to 2-1/8 in
- Spiral flute design grips broken fasteners securely
- Carbon steel construction resists wear during extraction
- Square drive 1-17/64 in fits standard wrenches
- Drill size 1-1/16 in prepares hole for removal
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Screw Extractors |
Questions about this item
How can I confirm the Cleveland 192 extractor is gripping properly after drilling the 1 1/16 in hole?
Turn the 1 17/64 in square drive counter-clockwise with a wrench; the spiral flutes should bite into the right-hand threaded bolt and back it out smoothly without slipping.
What comes with the C53659 package and what must I supply myself?
The box contains the single spiral-flute extractor; you must provide a 1 1/16 in drill bit, a wrench or socket for the 1 17/64 in square drive, and cutting lubricant.
Which Cleveland extractor should I choose for a bolt between 1 3/4 in and 2 1/8 in diameter?
Select the No 9 model (part 192) — it is made for that bolt range and requires a 1 1/16 in pilot hole.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
