Cleveland Golf
Cleveland Golf C65576 Hex Rethreading Pipe Die Carbon Steel 1-11-1/2 NPT 11.5 TPI
Cuts new NPT threads on 1-inch pipe using carbon-steel hex dies at 11.5 TPI
- TypeDies & Taps
- MaterialCarbon
- Carbon steel construction resists wear during rethreading
- Hex shape allows wrench leverage in tight spaces
- 5 TPI NPT threads restore pipe connections accurately
- Right-hand thread direction matches standard piping systems
- 1-inch die thickness provides durability for repeated use
Hex Rethreading Pipe Die
The Cleveland C65576 is a carbon steel die for restoring damaged threads on pipe and conduit fittings. It cuts right-hand NPT threads to specification. The hex profile allows operation with a standard wrench or socket. It is intended for maintenance and repair work on threaded connections.
Plumbers and maintenance technicians
This die suits professionals who need to repair existing NPT threads on 1-inch pipe without cutting new threads from raw stock. It is not for fabricators who require a complete tap and die set for creating fresh threads on unthreaded pipe. Buyers needing left-hand thread capability should look elsewhere.
1-11.5 NPT thread specification
The die cuts 1-inch nominal pipe threads at 11.5 threads per inch to NPT standard. This single thread size determines whether the tool matches the fitting being repaired. Verify the pipe marking before purchase to confirm compatibility. The carbon steel construction provides durability for repeated rethreading tasks.
Highlights
- Carbon steel construction resists wear during rethreading
- Hex shape allows wrench leverage in tight spaces
- 5 TPI NPT threads restore pipe connections accurately
- Right-hand thread direction matches standard piping systems
- 1-inch die thickness provides durability for repeated use
Specifications
| Brand | Cleveland |
|---|---|
| Model | C65576 |
| Type | Dies & Taps |
| Material | Carbon |
Questions about this item
Does the Cleveland C65576 hex die come with a handle or must one be purchased separately?
The die is a 1-11-1/2 NPT carbon-steel hex rethreading die; a compatible die stock or wrench is not included and must be sourced separately.
How do I decide between the available NPT sizes when only the 1-11-1/2 11.5 TPI version is listed?
Only the 1-11-1/2 NPT size with 11.5 threads per inch is offered under model C65576; choose it when the pipe or fitting you are repairing matches that exact thread specification.
What does the 11.5 TPI rating mean when I use this die on a pipe thread?
It indicates 11.5 threads per inch on a right-hand NPT taper, so each full turn advances the thread 1/11.5 inch and creates the standard seal profile for 1 inch nominal pipe.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
