Cleveland Golf
Cleveland Golf Angle Pitch Slope Locator 7/32 TiAlN 135° 2075TA
A jobber drill bit with a 135-degree point angle and TiAlN finish for high-performance drilling
- TypeAngle, Pitch & Slope Locators
- 7/32 inch drill bit size for precise hole dimensions
- 135 degree point angle enables efficient cutting starts
- TiAlN coating extends tool life and resists heat
- Parabolic flute design improves chip evacuation in deep holes
- Cobalt steel construction delivers high-performance drilling strength
7/32 Cobalt Jobber Drill
The Cleveland 2075TA is a 7/32 inch cobalt steel jobber drill bit finished in TiAlN. Its 135 degree notch point and parabolic flute design suit high-performance drilling in metal workshops and maintenance departments. The right-hand cutting direction matches standard drill motors and drill presses. Decimal size 0.2188 inch is stamped on the shank for quick identification.
Straightforward Chuck Fit
The 7/32 inch shank drops into any standard three-jaw chuck or quick-change adapter without reducers. Parabolic flutes pull chips upward, reducing clogging in deep holes, while the TiAlN coating resists heat buildup during sustained cuts. Coolant is not fed through the tool, so external flood or mist cooling must be arranged for tough alloys. The 3-3/4 inch overall length clears most fixtures without excessive overhang.
Metalworkers Needing One Precise Size
Machinists and fabricators who repeatedly drill 7/32 inch holes in steel, stainless or titanium will value the cobalt substrate and wear-resistant coating. Shops requiring a full fractional set, metric sizes, or through-coolant capability should look elsewhere because this listing covers a single diameter in a non-coolant-through design. It is not a multi-bit kit or an indexable system.
Highlights
- 7/32 inch drill bit size for precise hole dimensions
- 135 degree point angle enables efficient cutting starts
- TiAlN coating extends tool life and resists heat
- Parabolic flute design improves chip evacuation in deep holes
- Cobalt steel construction delivers high-performance drilling strength
Specifications
| Brand | Cleveland |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
How do I confirm the 135-degree point angle is cutting correctly after I start drilling?
A clean, centred hole with consistent chip evacuation and no wandering indicates the 135-degree notch point is performing as designed.
What comes in the package and is a drill chuck included?
The box contains the 7/32-inch cobalt steel jobber drill with TiAlN finish; a compatible drill chuck or holder must be supplied separately.
Which version should I choose for deep-hole drilling in tough steel?
Select the 2075TA parabolic-flute model; its geometry and TiAlN coating are built for deep, high-performance drilling in difficult materials.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
