Cleveland Golf
Cleveland Golf 25216 Chucking Reamer 1/8 In 6 Flute HSS
A high-speed steel chucking reamer with six flutes for precise hole finishing in fractional inch sizes
- TypeAngle, Pitch & Slope Locators
- High-speed steel construction resists wear during repeated reaming
- Six-flute design produces smooth, accurate holes in metal
- Bright uncoated finish allows easy inspection of cutting edges
- Straight shank fits standard chucks for secure holding
- Fractional 1/8-inch diameter suits precision machining tasks
Chucking Reamer for Precision Holes
The Cleveland Golf 25216 is a high-speed steel chucking reamer designed for machining accurate fractional-inch holes. It suits machinists and maintenance technicians who need a straight, bright-finish tool for general-purpose reaming tasks.
1/8-Inch Diameter with Six Flutes
The single specification that determines fit is the 1/8-inch cutting diameter combined with a six-flute configuration. This fractional size and flute count fix the hole tolerance and chip evacuation profile, so the reamer only matches operations requiring that exact geometry.
Straight-Shank Design for Standard Chucking
The straight shank fits directly into drill-press chucks, collets or tool holders without adapters. Common issues arise if the workpiece is not rigidly clamped or if cutting fluid is omitted, both of which can cause chatter, oversized holes or premature tool wear.
Highlights
- High-speed steel construction resists wear during repeated reaming
- Six-flute design produces smooth, accurate holes in metal
- Bright uncoated finish allows easy inspection of cutting edges
- Straight shank fits standard chucks for secure holding
- Fractional 1/8-inch diameter suits precision machining tasks
Specifications
| Brand | Cleveland |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
How does the 1/8 inch cutting diameter perform when chucked in a drill press or lathe?
The 1/8 inch diameter is a fractional-inch size that fits standard chucks and collets, allowing the six-flute high-speed steel body to enlarge or finish holes to a tight tolerance in steel, aluminium or plastic.
What does the straight-shank, six-flute design mean for chip removal and finish quality?
Six straight flutes give a smoother surface finish than fewer flutes and evacuate chips evenly in through-holes, while the bright uncoated high-speed steel resists galling in softer metals.
What shank diameter and overall length does the reamer need for a standard drill chuck?
The straight shank matches the 1/8 inch nominal size so it seats directly in a 1/8 inch or 3 mm drill chuck without a sleeve, and the standard jobber-length body clears most work-holding setups.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
