Cleveland
Cleveland C96143 Spiral Point Tap M10x1.5 3 Flutes
A spiral-point tap cuts M10 × 1.5 metric threads in through-holes using three flutes and a 100 mm cobalt body with black-oxide finish
- Spiral-point design pushes chips forward for smooth through-hole tapping
- M10 x 1.5 metric thread fits standard 8.50 mm drill size
- Cobalt construction with black-oxide finish resists wear in tough materials
- Three flutes balance strength and chip clearance for reliable cuts
- 100 mm overall length with 40 mm thread reach suits deep holes
Cleveland C96143 Spiral Point Tap M10x1.5
The Cleveland C96143 is a spiral point tap designed for creating M10x1.5 metric threads. It suits engineers and technicians who need accurate internal threads in metal components using machine tapping operations.
Cobalt construction with black oxide finish
Cobalt material provides high heat resistance and wear life when cutting tough alloys. The black oxide finish helps retain cutting fluid and reduces chip welding. The spiral point geometry pushes chips ahead of the tap, which improves clearance in through-hole applications.
Verify drill size and thread fit before ordering
You must use a 8.50 mm drill to produce the correct 75 percent thread engagement for the 6H class of fit. Ensure your workpiece material and machine setup suit right-hand threading with a 40 mm thread length and 100 mm overall length.
Highlights
- Spiral-point design pushes chips forward for smooth through-hole tapping
- M10 x 1.5 metric thread fits standard 8.50 mm drill size
- Cobalt construction with black-oxide finish resists wear in tough materials
- Three flutes balance strength and chip clearance for reliable cuts
- 100 mm overall length with 40 mm thread reach suits deep holes
Specifications
| Brand | CLEVELAND |
|---|
Questions about this item
When will the M10x1.5 tap need replacement during production threading?
Replace the tap when the 40 mm cutting length shows flank wear that exceeds the 6H class-of-fit tolerance on the M10x1.5 thread.
What limit appears first when tapping M10x1.5 holes continuously?
The 75 % thread engagement with the 8.50 mm drill size reaches torque limit before the 100 mm overall length can dissipate heat.
How much heat builds up in the cobalt body during all-day M10x1.5 tapping?
Cobalt construction and black-oxide coating keep the 100 mm tool body cool enough for continuous right-hand cutting at the 40 mm thread length.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
