Cleveland
Cleveland C96039 Spiral Point Tap M7x1 3 Flutes Cobalt
Spiral point tap cuts M7×1 metric threads in 80 mm overall length with 30 mm thread length, three cobalt flutes and 6.00 mm drill size for 75 % thread engagement
- M7x1 metric thread for precise component fit
- Spiral point design pushes chips ahead for smoother tapping
- Cobalt construction resists wear in hard materials
- Three flutes balance chip clearance with cutting strength
- 80 mm overall length reaches deeper holes
Thread Cutting Tool for M7x1 Metric Holes
The Cleveland C96039 is a spiral point tap designed to cut internal threads in M7x1 metric holes. Its cobalt construction and Hard Lube coating provide wear resistance for demanding materials. The right-hand, 3-flute geometry pushes chips ahead of the cut, making it suited for through-hole applications in maintenance or production environments.
Verify Hole Size and Thread Standard Before Use
Check that your drilled hole matches the 75 percent thread drill size of 6.00 mm before tapping. Ensure the workpiece material is compatible with cobalt tooling and that the required class of fit is 6H. The thread limit is also 6H, so confirm these specifications align with your engineering drawing or repair requirements.
Through-Hole Tapping with Chip Evacuation Forward
The spiral point design directs chips forward out of the hole, reducing clogging in through-hole work. The tap has an overall length of 80 mm with a 30 mm thread length. It requires a compatible tap wrench or holder for hand or machine operation. No external coolant system is mandated, though lubrication improves tool life.
Highlights
- M7x1 metric thread for precise component fit
- Spiral point design pushes chips ahead for smoother tapping
- Cobalt construction resists wear in hard materials
- Three flutes balance chip clearance with cutting strength
- 80 mm overall length reaches deeper holes
Specifications
| Brand | CLEVELAND |
|---|
Questions about this item
What comes with the C96039 tap and what else do I need?
The box contains the spiral-point tap itself. You will need a 6.00 mm drill bit for the 75 percent thread hole and a tap wrench or holder to drive the 80 mm long tool.
How do I choose between the thread limits for this M7x1 tap?
This model is supplied in a single 6H thread limit with a 6H class of fit, so there is no alternative version to select.
What does the 30 mm thread length mean when I am tapping a hole?
It is the cutting portion of the tap; you can cut full-form threads up to 30 mm deep in a through hole or blind hole with sufficient clearance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
