Cleveland
Cleveland C96035 Spiral Point Tap M3.5x0.6 Plug 3 Flutes
M3.5×0.6 spiral-point plug tap, 56 mm overall length, cobalt with hard-lube coating, three flutes, 2.90 mm drill size for 75 percent thread, 6H class of fit
- M3.5 x 0.6 metric coarse thread cuts precise internal threads
- Spiral point design pushes chips forward for efficient through-hole tapping
- Three flutes provide balanced chip clearance and threading strength
- Cobalt construction with Hard Lube coating resists wear in tough materials
- 56 mm overall length with 19.99 mm thread length suits standard tapping depths
Cleveland C96035 Spiral Point Tap M3.5x0.6
This spiral point tap cuts metric coarse threads sized M3.5x0.6 for through-hole applications. It suits maintenance technicians and machinists who need reliable thread creation in general-purpose materials. The 56 mm overall length provides standard reach for common tapping tasks. Cobalt construction with Hard Lube coating enhances wear resistance during repetitive use.
Installation and common issues
The tap requires a 2.90 mm drill size to achieve the 75 percent thread engagement specified for the 6H class of fit. Right-hand cutting direction follows standard practice for most machine setups. Breakage often occurs when chips pack the flutes in deep holes or when cutting fluid is omitted. Proper alignment prevents oversized threads and tap failure.
Practical limits of metric coarse tapping
The 19.99 mm thread length defines the maximum effective cutting depth in a single pass. Three flutes balance chip evacuation with core strength but limit use in very deep or blind holes. The 6H tolerance class fits standard metric hardware but excludes precision assemblies requiring tighter fits. Cobalt material handles stainless steel and tough alloys better than high-speed steel alternatives.
Highlights
- M3.5 x 0.6 metric coarse thread cuts precise internal threads
- Spiral point design pushes chips forward for efficient through-hole tapping
- Three flutes provide balanced chip clearance and threading strength
- Cobalt construction with Hard Lube coating resists wear in tough materials
- 56 mm overall length with 19.99 mm thread length suits standard tapping depths
Specifications
| Brand | CLEVELAND |
|---|
Questions about this item
How can I confirm the Cleveland C96035 tap is cutting correctly after setup?
A properly functioning tap produces a continuous spiral of chips being pushed ahead of the flutes and yields threads that a 6H go gauge accepts without binding.
What comes with the Cleveland C96035 tap and what must I supply?
The package contains the single M3.5 x 0.6 spiral point tap; you must provide a 2.90 mm drill for the 75 percent thread hole, a tap wrench or holder, and cutting fluid.
When should I choose the Cleveland C96035 over another tap?
Select the C96035 when you need a cobalt, hard-lubed, right-hand spiral point tap with three flutes for through-hole M3.5 x 0.6 threads to a 6H class of fit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
