Cleveland
Cleveland C96002 Spiral Point Tap #3-48 UNC Cobalt 3 Flutes
Cuts #3-48 UNC threads with a cobalt spiral-point plug tap featuring three flutes and Hard Lube coating
- Spiral point design clears chips forward for smoother tapping
- Cobalt construction resists heat and wear during high-speed threading
- 3-48 UNC thread size matches precise fastener requirements
- Three flutes balance strength and chip evacuation in blind holes
- Hard Lube coating reduces friction for longer tool life
Cleveland C96002 Spiral Point Tap #3-48 UNC
This new Cleveland C96002 spiral point tap cuts internal threads sized #3-48 UNC. The cobalt construction with Hard Lube coating resists wear during repeated use. It features a right-hand thread direction and a 2B class of fit for standard tolerance. Machinists and maintenance technicians use it to create precise threads in metal components.
Fits standard tap holders
The 1 31/32 in overall length and 19/32 in thread length reach into typical workpieces without special tooling. A 2.00 mm drill size prepares the 75 percent thread hole before tapping. Three flutes evacuate chips ahead of the cut, reducing torque and clearing the hole efficiently. The plug chamfer starts threads cleanly in through-holes or deep blind holes.
Suits professionals cutting #3-48 UNC threads
Builders needing coarse threads, left-hand threads, or larger diameters must select a different tap. The fixed 2B thread limit does not accommodate tighter or looser fit classes required by some specifications. Cobalt material excels in harder metals but may be unnecessary for soft materials like aluminium or plastic. Users without a 2.00 mm drill cannot prepare the correct hole size.
Highlights
- Spiral point design clears chips forward for smoother tapping
- Cobalt construction resists heat and wear during high-speed threading
- 3-48 UNC thread size matches precise fastener requirements
- Three flutes balance strength and chip evacuation in blind holes
- Hard Lube coating reduces friction for longer tool life
Specifications
| Brand | CLEVELAND |
|---|
Questions about this item
What thread limit applies when the tap is run continuously in production?
The tap is ground to a 2B thread limit, which controls the pitch diameter tolerance during sustained threading operations.
How much heat builds up in the cobalt flutes during all-day tapping?
Cobalt steel retains hardness at elevated temperatures, and the Hard Lube coating reduces friction so the three flutes stay cooler during extended use.
Which drill bit must I already have to prepare the 75 percent thread hole?
A 2.00 mm drill bit is required to produce the correct tap drill size for 75 percent thread engagement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
