Cleveland
Cleveland C81853 4-Flute Carbide Crn Rad Single End GP End Mill
A four-flute carbide end mill with corner radius for general-purpose milling in inch sizes
- TypeMilling
- 4-flute design improves chip evacuation and surface finish
- Carbide substrate with TiAlN coating resists wear in high-temp cuts
- 25 in cutting diameter suits small-feature profiling
- 06 in corner radius strengthens edges against chipping
- 75 in flute length and 2 1/2 in overall reach access deeper cavities
Cleveland C81853 End Mill Overview
This Cleveland C81853 is a 4-flute carbide corner radius end mill designed for general-purpose milling applications. It features a TiAlN coating for improved wear resistance and heat dissipation. The tool has a 0.25 inch milling diameter and a 0.06 inch corner radius. It is intended for machinists and fabricators working with various materials.
Compatibility Check Before Purchase
Verify that your milling machine accepts straight shank tooling with the appropriate collet or holder size. Confirm the 0.25 inch diameter and 2 1/2 inch overall length suit your machine's work envelope and clearance requirements. Ensure the TiAlN coating is compatible with your intended workpiece material and coolant strategy. Check that the 0.75 inch length of cut meets your depth requirements.
Ideal Users And Limitations
This end mill suits general-purpose machining in shops needing a versatile carbide tool with corner radius geometry. The 4-flute design benefits operations requiring good surface finish and chip evacuation in slotting or profiling. Buyers needing ball nose or square end geometries should look elsewhere. Those requiring specific flute counts or coatings not listed here will need alternative tooling.
Highlights
- 4-flute design improves chip evacuation and surface finish
- Carbide substrate with TiAlN coating resists wear in high-temp cuts
- 25 in cutting diameter suits small-feature profiling
- 06 in corner radius strengthens edges against chipping
- 75 in flute length and 2 1/2 in overall reach access deeper cavities
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
What comes with the C81853 end mill and is a tool holder sold separately?
The box contains the single-end carbide end mill only; a compatible collet or tool holder must be purchased separately.
How do I choose between the 0.25 in diameter and the 0.06 in corner radius for my milling job?
Select the 0.25 in diameter for the required slot width and the 0.06 in corner radius when the part drawing calls for that fillet size.
What does the 0.75 in length of cut mean when the tool is in the spindle?
It allows a maximum axial engagement of 0.75 in per pass before the shank contacts the workpiece.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
