Cleveland
Cleveland C81040 2-Flute Carbide Square End Mill .375 in Dia .625 in LOC
A 2-flute carbide square end mill with a .375 in diameter and .625 in length of cut for general-purpose milling
- TypeMilling
- 2-flute carbide design enables efficient chip evacuation
- TiAlN coating extends tool life in high-speed milling
- 375 in diameter suits precise slotting and profiling
- 625 in length of cut handles deeper passes
- 2 in overall length fits standard 3/8 in shank holders
Cleveland C81040 2-Flute Carbide End Mill
The Cleveland C81040 is a 2-flute carbide square end mill built for general-purpose milling. Its TiAlN coating increases wear resistance and allows higher cutting speeds in a range of materials. The tool suits CNC operators and machinists who need a reliable single-end cutter for slotting and profiling tasks.
.375 in diameter with .625 in length of cut
A 0.375 inch milling diameter and 0.625 inch length of cut provide reach for medium-depth pockets and slots. The 3/8 inch shank fits standard ER collets and end mill holders without adapters. Carbide construction maintains edge integrity in steel and cast iron, though the non-coolant-through design limits chip evacuation in deep cavities.
Upgrades from uncoated or HSS cutters
Replacing uncoated carbide or high-speed steel end mills with this TiAlN-coated tool extends tool life and permits faster feed rates. The jump is worthwhile when cycle time and finish quality matter on ferrous alloys. Shops cutting non-ferrous materials or requiring through-spindle coolant should select a different geometry.
Highlights
- 2-flute carbide design enables efficient chip evacuation
- TiAlN coating extends tool life in high-speed milling
- 375 in diameter suits precise slotting and profiling
- 625 in length of cut handles deeper passes
- 2 in overall length fits standard 3/8 in shank holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
Will the 3/8 in shank of the C81040 fit the collet I already use on my older milling machine?
The Cleveland C81040 has a 3/8 in shank diameter, so it will fit any standard 3/8 in collet or end mill holder you currently use.
How can I confirm the TiAlN coating on the C81040 is performing correctly after installation?
The gold-violet colour of the TiAlN coating should remain intact on the flutes; consistent chip evacuation and stable cutting temperatures during a test cut in steel indicate the coating is working as intended.
Does the C81040 come with any collets, holders or coolant adapters, or must I buy those separately?
The box contains only the single 2-flute carbide square end mill; collets, tool holders and any coolant-through adapters are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
