Cleveland
Cleveland C81014 Carbide Square End Mill
A 2-flute carbide square end mill with a .140625 in milling diameter and .5625 in length of cut for general-purpose machining
- TypeCutting Tools
- Carbide construction resists wear for longer tool life
- TiAlN coating reduces friction and heat during cutting
- 2-flute design clears chips efficiently in slotting operations
- 140625 in diameter suits precision milling tasks
- 5625 in length of cut handles shallow pocketing work
Precision Carbide End Mill
The Cleveland C81014 is a solid-carbide square end mill designed for general-purpose milling in a variety of materials. It features a two-flute geometry with a TiAlN coating to improve wear resistance and tool life during cutting operations. The cutter has a 0.140625 inch milling diameter and a 0.5625 inch length of cut.
Best for Slotting and Profiling
This tool suits machinists who need a rigid, coated carbide cutter for slotting, profiling and plunge cuts in steel or aluminium. The 3/16 inch shank fits standard collets and holders for small-diameter work. Buyers who require a longer reach, a ball-nose profile or a higher flute count for finishing passes should look at a different tool.
Direct Shank Mounting
Installation is straightforward: clamp the 3/16 inch shank into a matching collet or end-mill holder and set the stick-out to suit the 0.5625 inch flute length. The most common issue is excessive tool deflection or chatter if the stick-out is too long for the shallow depth of cut.
Highlights
- Carbide construction resists wear for longer tool life
- TiAlN coating reduces friction and heat during cutting
- 2-flute design clears chips efficiently in slotting operations
- 140625 in diameter suits precision milling tasks
- 5625 in length of cut handles shallow pocketing work
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Cutting Tools |
Questions about this item
What milling machine or CNC router accepts a 3/16 in shank for the Cleveland C81014 end mill?
Any milling machine, CNC router, or drill press with a 3/16 in collet or chuck will hold the Cleveland C81014 securely.
Can the Cleveland C81014 end mill be used in an older manual mill that only takes 1/4 in shanks?
No, the Cleveland C81014 has a 3/16 in shank and requires a matching 3/16 in holder; it will not fit a 1/4 in collet.
How do I verify the Cleveland C81014 is cutting correctly after installation?
Check for smooth chip evacuation, consistent 0.140625 in slot width, and no chatter marks along the 0.5625 in length of cut.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
