Cleveland
Cleveland C80654 Carbide Square End Mill
A 0.375 in carbide square end mill with TiAlN coating, 0.875 in length of cut, 2 1/2 in overall length and 3/8 in shank for general-purpose milling
- TypeCutting Tools
- Carbide construction resists wear for longer tool life
- 375 inch milling diameter suits precise profiling tasks
- 875 inch length of cut enables deeper passes
- TiAlN coating reduces friction and heat buildup
- Straight shank design fits standard 3/8 inch holders
Cleveland C80654 Carbide End Mill
This Cleveland C80654 is a two-flute carbide square end mill designed for general-purpose milling in a workshop or light-production environment. The TiAlN coating helps extend tool life when cutting steel, stainless steel and other ferrous alloys.
Installation and common issues
The tool uses a straight shank measuring 3/8 in, so it fits standard ER collets, Weldon flats or shrink-fit holders without adapters. Run-out increases quickly if the collet is worn or the holder is not seated fully, and the non-coolant-through design means chips can re-cut in deep slots unless external flood coolant is aimed correctly.
Check your setup before ordering
Verify that your machine spindle accepts a 3/8 in shank and that the 2 1/2 in overall length clears the workpiece and fixture. The 0.375 in cutting diameter and 0.875 in length of cut must match the feature size and depth you plan to machine, and the holder must provide enough grip length for the straight shank.
Highlights
- Carbide construction resists wear for longer tool life
- 375 inch milling diameter suits precise profiling tasks
- 875 inch length of cut enables deeper passes
- TiAlN coating reduces friction and heat buildup
- Straight shank design fits standard 3/8 inch holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Cutting Tools |
Questions about this item
How can I confirm the 0.375 in milling diameter is cutting true after setup?
Measure the finished slot width with a calibrated micrometer; it should match the 0.375 in diameter within your shop tolerance.
What ships with the C80654 and what must I source separately?
The box contains the single carbide square end mill only; tool holders, collets and coolant supply are purchased separately.
Which version of the 80654 should I choose for a 0.875 in depth of cut?
This model provides a 0.875 in length of cut on a 2 1/2 in overall length with a 3/8 in shank, so select it when those dimensions match your operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
