Cleveland
Cleveland C80651 2-Flute Carbide Square End Mill
A 2-flute carbide square end mill with a 0.1875 in diameter and 0.625 in length of cut
- TypeCutting Tools
- Two-flute design clears chips efficiently
- Carbide construction resists wear for longer tool life
- TiAlN coating reduces friction and heat buildup
- 3/16 in shank fits standard collets and holders
- 1875 in cutting diameter suits fine detail work
Cleveland C80651 Carbide End Mill
The Cleveland C80651 is a solid-carbide square end mill built for general-purpose milling. Its two-flute straight design suits machinists and fabricators who need reliable slotting and profiling in a range of materials. The TiAlN coating adds wear resistance for longer tool life. This cutter is not for buyers who need coolant-through capability or multi-flute finishing geometry.
Straight-Shank Milling Limits
The tool uses a standard 3/16 in straight shank held in a collet or end-mill holder. Run-out and rigidity depend entirely on the holder quality and machine spindle condition. Maximum depth of cut is constrained by the .625 in length of cut and the 2 in overall length. This design cannot support through-coolant drilling or high-feed strategies that demand internal coolant channels.
0.1875 in Cutting Diameter
The .1875 in milling diameter is the single dimension that determines whether this cutter fits the programmed tool path. It sets the minimum internal radius and the step-over possible in a single pass. Select this mill only when the CAD/CAM operation calls for this exact diameter. A different diameter will not produce the required feature geometry.
Highlights
- Two-flute design clears chips efficiently
- Carbide construction resists wear for longer tool life
- TiAlN coating reduces friction and heat buildup
- 3/16 in shank fits standard collets and holders
- 1875 in cutting diameter suits fine detail work
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Cutting Tools |
Questions about this item
Which Cleveland end mill should I choose for a 3/16 inch shank and 0.1875 inch milling diameter?
The C80651 matches that shank and diameter with a 0.625 inch length of cut and 2 inch overall length in carbide with TiAlN coating.
What does the 0.1875 inch milling diameter mean when the tool is in the spindle?
It is the cutting diameter that will produce a 3/16 inch wide slot or profile in a single pass.
What interface does the straight shank use and what does it limit?
The 3/16 inch straight shank fits standard ER collets or Weldon holders and limits the tool to holders that accept that shank size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
