Cleveland
Cleveland C80528 5-Flute Carbide End Mill .1875 in TiAlN
5-flute carbide end mill with TiAlN coating cuts ferrous materials at 0.1875 in diameter and 0.4375 in length of cut
- TypeMilling
- 5-flute design reduces chatter in ferrous materials
- TiAlN coating extends tool life at higher temperatures
- Carbide construction maintains edge hardness under load
- 1875 in diameter suits precision milling tasks
- 01 in corner radius strengthens cutting edges
Cleveland C80528 Carbide End Mill
The Cleveland C80528 is a 5-flute carbide end mill with a TiAlN coating. It has a 0.1875 in milling diameter and a 0.01 in corner radius. This tool is designed for milling ferrous materials in professional machining applications.
Suited for ferrous milling; not for non-ferrous work
This end mill suits machinists cutting steel and other ferrous alloys where the TiAlN coating resists heat and wear. The 5-flute design supports higher feed rates in these materials. Buyers needing tools for aluminium, brass or plastic should look at different geometries and uncoated or differently coated cutters.
0.1875 in diameter with 0.01 in corner radius
The cutting diameter is 0.1875 in and the corner radius measures 0.01 in. These two dimensions determine whether the tool fits the programmed toolpath and meets the part tolerance. Verify both numbers against your drawing before purchasing.
Highlights
- 5-flute design reduces chatter in ferrous materials
- TiAlN coating extends tool life at higher temperatures
- Carbide construction maintains edge hardness under load
- 1875 in diameter suits precision milling tasks
- 01 in corner radius strengthens cutting edges
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
What milling diameter does the 0.1875 in end mill cut, and what corner radius does it leave?
The cutter has a 0.1875 in milling diameter and a 0.01 in corner radius, producing a small radius at the bottom of each slot.
What shank size and overall length are required to hold this tool in a toolholder?
The straight shank matches the 0.1875 in cutting diameter and the overall length is 2 in, so a 0.1875 in collet or end-mill holder with at least 2 in of gauge length is needed.
How is the TiAlN-coated carbide end mill installed, and what step is often missed?
Clamp the tool by its cylindrical shank in a precision collet or shrink-fit holder, then verify the 0.4375 in flute length clears the workpiece — operators sometimes forget to check stick-out before starting the spindle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
