Cleveland
Cleveland C80116 .625 in Ball Nose End Mill pneumatic accessory
A 0.625 in carbide ball nose end mill with four flutes for profiling and finishing
- 625 in milling diameter for precise contouring
- Four-flute carbide construction resists wear in tough materials
- Ball nose profile creates smooth radius finishes
- Non-coolant-through design simplifies tool setup
- Cleveland brand backs consistent manufacturing quality
Ball Nose End Mill .625 in
The Cleveland C80116 is a carbide ball nose end mill with a 0.625 inch milling diameter. It is designed for machining operations requiring contoured surfaces and corner radii. The four-flute construction supports stable material removal in general milling applications. Machinists and maintenance technicians use this accessory with compatible milling machines.
Carbide tool practical limits
Carbide provides high hardness and heat resistance for extended tool life in steel and alloy machining. The non-coolant-through design requires external flood or mist cooling to manage heat at the cutting zone. AP/MAX geometry influences chip evacuation and surface finish depending on feed rates and depth of cut. Tool deflection increases with longer overhangs and aggressive parameters.
Machine and holder compatibility
Verify the machine spindle accepts the shank diameter and length of this end mill. Confirm the tool holder provides sufficient clamping force for carbide shanks to prevent slippage. Ensure the workholding rigidly secures the workpiece against cutting forces generated by four-flute engagement. Check that the machine power and torque curves suit the intended material removal rate.
Highlights
- 625 in milling diameter for precise contouring
- Four-flute carbide construction resists wear in tough materials
- Ball nose profile creates smooth radius finishes
- Non-coolant-through design simplifies tool setup
- Cleveland brand backs consistent manufacturing quality
Specifications
| Brand | CLEVELAND |
|---|
Questions about this item
Should I choose the .625 in diameter or a different size?
The .625 in milling diameter is the only size offered for this Cleveland C80116 end mill; select it when your tool path calls for a 5/8 inch ball nose cutter.
How does the .625 in milling diameter perform in a real machine?
A .625 in carbide ball nose removes material with a 4-flute geometry, giving a smooth finish on contours and 3-D profiles in steel, stainless or hardened alloys.
What shank standard does the Cleveland C80116 use and what does it limit?
The tool uses a standard fractional-inch shank that fits .625 in collets or holders, so the shank diameter caps the maximum tool-holder size you can use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
