Cleveland
Cleveland C80078 4-Flute Carbide HP VI CrnRad Single EndMill .75 in Milling Dia
A 4-flute carbide end mill with a .75 in milling diameter, .125 in corner radius, 1.5 in flute length and 4 in overall length
- TypeMilling
- .75 in milling diameter handles large material removal
- Four-flute carbide design resists wear in high-speed cuts
- TiAlN coating reduces friction and extends tool life
- 125 in corner radius strengthens edges against chipping
- 5 in flute length reaches deep pockets in one pass
Cleveland C80078 4-Flute End Mill
This Cleveland C80078 is a 4-flute carbide corner-radius end mill with a 0.75 in milling diameter. It features a TiAlN coating for extended tool life in high-performance milling operations. The single-end design suits CNC machining centres and manual milling machines. It is intended for machinists and toolrooms cutting ferrous and non-ferrous materials.
Installing the .75 in carbide end mill
Secure the shank in a precision collet or hydraulic holder to minimise runout at the 0.125 in corner radius. Verify the 1.5 in length of cut clears the workpiece and fixtures before starting the spindle. Excessive overhang causes vibration and premature flank wear. Improper clamping torque or worn holders are the most common causes of poor surface finish and tool breakage.
Check your setup before ordering 80078
Confirm your machine spindle accepts the straight shank diameter and provides sufficient rigidity for carbide tooling. Ensure the programmed feed and speed rates match the TiAlN coating capabilities for your specific workpiece material. Verify the 4 in overall length fits within your machine envelope and tool changer limits. Buyers needing a different corner radius, flute count or cutting diameter must select another tool.
Highlights
- .75 in milling diameter handles large material removal
- Four-flute carbide design resists wear in high-speed cuts
- TiAlN coating reduces friction and extends tool life
- 125 in corner radius strengthens edges against chipping
- 5 in flute length reaches deep pockets in one pass
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
How do I confirm the end mill cuts cleanly after installing it?
Run a test pass and check for smooth corner radii and consistent chip evacuation from the four flutes.
What comes with the C80078 end mill and what must I supply?
The single end mill is supplied; you must provide a compatible tool holder and workpiece fixturing.
Which corner radius version should I select for general milling?
The C80078 has a fixed 0.125 in corner radius suited for general-purpose profiling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
