Cleveland
Cleveland C80076 4-Flute Carbide HP VI CrnRad Single End Mill
Four-flute carbide end mill with TiAlN coating and 0.06 in corner radius for 0.75 in milling diameter
- TypeMilling
- 75 inch milling diameter handles heavy cuts
- Four-flute carbide geometry extends tool life
- TiAlN coating resists heat during high-speed passes
- 06 inch corner radius strengthens cutting edges
- 5 inch flute length reaches deep cavities
Cleveland C80076 4-Flute Carbide End Mill
This Cleveland C80076 is a 4-flute carbide end mill with a corner radius for high-performance milling. The TiAlN coating adds wear resistance for longer tool life. It suits CNC machinists and maintenance shops cutting steel, stainless steel or high-temperature alloys.
Machining fit and limitations
The .75 in diameter and .06 in corner radius fit profiling and finishing passes that need a specific radius. The 1.5 in length of cut limits reach in deep cavities. Buyers who need longer reach or a different radius should look at other tooling.
Corner radius decides fit
The .06 in corner radius is the single specification that determines whether this cutter matches the print requirement. Verify the drawing calls for this exact radius before ordering.
Highlights
- 75 inch milling diameter handles heavy cuts
- Four-flute carbide geometry extends tool life
- TiAlN coating resists heat during high-speed passes
- 06 inch corner radius strengthens cutting edges
- 5 inch flute length reaches deep cavities
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
What corner-radius limit defines the first wear zone on this 0.75 in end mill?
The 0.06 in corner radius sets the profile that contacts the workpiece first during sustained cutting.
How much heat builds up in the carbide body during an all-day milling run?
The TiAlN coating on the carbide substrate reduces friction and helps dissipate heat generated in the 1.5 in length of cut.
Which tool-holder interface must the shop already own to run this single-end mill?
A straight-shank holder that accepts a 0.75 in diameter shank is required to secure the mill in the spindle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
