Cleveland
Cleveland C80014 4-Flute Carbide HP VI CrnRad Single EndMill
A 0.25 in carbide corner-radius end mill with 0.02 in radius, TiAlN coating and 0.5 in length of cut
- TypeMilling
- 4-flute carbide design enables smooth multi-edge milling
- TiAlN coating increases wear resistance during high-speed cuts
- 25 in cutting diameter suits precision slotting tasks
- 02 in corner radius strengthens tip against chipping
- 2 in overall length provides stable reach in deep pockets
Cleveland C80014 End Mill Overview
This Cleveland C80014 is a 4-flute carbide end mill with a corner radius, designed for precision milling tasks. It suits machinists and fabricators who need a reliable single-end cutter for general-purpose material removal. The tool features a TiAlN coating for enhanced wear resistance during operation. It is intended for users working with inch-based tooling systems.
Sustained Load Behaviour
Under continuous cutting, the carbide substrate maintains its hardness while the TiAlN coating reduces heat buildup at the cutting edges. The four-flute design allows for consistent chip evacuation during extended passes, helping to prevent flute packing. The corner radius geometry distributes cutting forces more evenly than a sharp corner, which supports longer tool life in repetitive profiling. Steady feed rates keep the tool within its optimal performance window.
Inch Standard Practical Limits
This end mill is manufactured to inch specifications with a 0.25 in milling diameter and a 0.02 in corner radius. The straight shank fits standard inch collets and holders without metric adapters. Users must ensure their machine spindle and workholding accommodate the 0.5 in length of cut and 2 in overall reach. The inch-based dimensions limit interchangeability with metric tooling systems.
Highlights
- 4-flute carbide design enables smooth multi-edge milling
- TiAlN coating increases wear resistance during high-speed cuts
- 25 in cutting diameter suits precision slotting tasks
- 02 in corner radius strengthens tip against chipping
- 2 in overall length provides stable reach in deep pockets
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
Does the 0.25 in carbide end mill generate noticeable heat during extended milling sessions?
The TiAlN coating on the carbide flutes reduces friction and helps dissipate heat when the tool runs continuously in steel or aluminium.
What shank size must my collet or holder accept for the 0.25 in diameter cutter?
The straight shank matches the 0.25 in milling diameter, so a 0.25 in collet or ER holder is required for secure clamping.
Will the 0.02 in corner radius work in the same toolpaths I use for square-end mills on my older CNC?
The small 0.02 in radius blends into existing roughing and finishing passes without changing step-over or feed calculations.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
