Cleveland
Cleveland C75188 Square End Mill .5 in Dia 1.5 in Cut
A square end mill with a .5 in diameter and 1.5 in cut length for milling operations
- TypeMilling
- 5 in diameter suits precision milling tasks
- 5 in length of cut enables deeper passes
- High-speed steel construction resists wear in general use
- Uncoated surface allows economical resharpening
- Weldon flat shank provides secure tool-holder grip
Cleveland C75188 Square End Mill
The Cleveland C75188 is a square end mill designed for general-purpose milling applications. It features a 0.5 inch milling diameter and a 1.5 inch length of cut, constructed from high speed steel with an uncoated finish. The tool has an overall length of 3 1/2 inches and a 1/2 inch shank diameter with a Weldon flat for secure holding.
Machinists needing standard slotting and profiling
This cutter suits machinists performing slotting, side milling, and profiling in a range of materials where a square corner is required. The uncoated high speed steel substrate performs well in softer steels, aluminium, and non-ferrous alloys. Buyers needing extended tool life in abrasive or hardened materials, or those requiring coolant-through capability for deep cavity work, should evaluate alternative tooling options.
Standard Weldon flat simplifies holder setup
Installation is straightforward using any standard Weldon-compatible end mill holder; the flat ensures positive drive and prevents pull-out during heavy cuts. The most common issue arises when the holder set screw does not align precisely with the flat, causing runout or vibration. Users should also verify that the 1.5 inch length of cut and 3 1/2 inch overall length provide sufficient reach and clearance for the specific workpiece and fixture.
Highlights
- 5 in diameter suits precision milling tasks
- 5 in length of cut enables deeper passes
- High-speed steel construction resists wear in general use
- Uncoated surface allows economical resharpening
- Weldon flat shank provides secure tool-holder grip
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
What size collet or holder do I need for the 1/2 in shank on this end mill?
The shank diameter is 1/2 in, so select a collet, end-mill holder or Weldon flat holder sized for 1/2 in shanks.
Will the 1-1/2 in length of cut reach the same depth as the older 1 in cutter I am replacing?
This tool provides 1.5 in of cutting length, giving an extra half inch of reach compared with a 1 in cutter.
How can I confirm the cutter is running true after I clamp it in the holder?
Indicate the .5 in cutting diameter at the flute tips; run-out should be within a few thousandths of an inch for a solid high-speed-steel tool.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
