We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland C61892 carbide end mill, 31/64 inch shank, uncoated finish

Cleveland

Cleveland C61892 carbide end mill 31/64 in shank 0.484375 in diameter

SKU CH-5JCW-KTN15

A carbide square end mill with a 31/64 in shank and .484375 in cutting diameter for general milling

  • TypeMilling
  • Carbide construction resists wear during milling operations
  • 31/64 inch shank diameter fits standard half-inch tool holders
  • 484375 inch cutting diameter for precise material removal
  • One inch length of cut enables deep pocket milling
  • Three inch overall length provides rigidity in the cut

Cleveland C61892 carbide end mill

The Cleveland C61892 is a solid carbide square end mill designed for general milling operations. It suits machinists and maintenance teams cutting ferrous and non-ferrous materials where an uncoated tool is preferred. The 31/64 in shank fits standard half-inch tool holders without adapters.

Straight shank and uncoated carbide

A straight 1/2 in shank provides direct clamping in collets and end-mill holders for minimal run-out. The uncoated carbide substrate resists abrasion in shorter runs and allows re-sharpening without coating removal. Non-coolant-through design keeps the tool simple for external flood or mist lubrication.

0.484375 in cutting diameter

The 0.484375 in diameter determines the slot width and profile radius this cutter produces. Select it when the finished feature must match this exact size; it cannot be used where a larger or smaller diameter is specified.

Highlights

  • Carbide construction resists wear during milling operations
  • 31/64 inch shank diameter fits standard half-inch tool holders
  • 484375 inch cutting diameter for precise material removal
  • One inch length of cut enables deep pocket milling
  • Three inch overall length provides rigidity in the cut

Specifications

BrandCLEVELAND
TypeMilling

Questions about this item

What shank diameter does the Cleveland C61892 carbide end mill require in the holder?

The tool has a 1/2 in shank diameter, so it fits standard 1/2 in collets or end-mill holders without adapters.

What overall length and flute length must the machine clearance accommodate?

Overall length is 3 in with a 1 in length of cut, so the spindle and work envelope must clear at least 3 in from the holder face.

How is this uncoated carbide end mill installed, and what common mistake should be avoided?

Clamp the 1/2 in shank fully into a clean collet or holder; the frequent error is leaving the shank partially exposed, which causes run-out and premature wear.

More in Power & Pneumatic Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.