Cleveland
Cleveland C61833 4-Flute Carbide Crn Rad Single End GP End Mill
A 4-flute carbide corner-radius end mill with a 0.1875 in milling diameter for general-purpose milling
- TypeMilling
- 4-flute carbide construction delivers rigid cutting performance
- Corner radius of .01 in strengthens edges for longer tool life
- .1875 in milling diameter suits precision profiling tasks
- .625 in length of cut enables deeper passes in one operation
- 2 in overall length provides reach in standard tool holders
Cleveland 4-Flute Carbide End Mill
This 0.1875 inch milling diameter end mill is built from solid carbide and features a 0.01 inch corner radius. It is designed for general purpose milling applications where precision and tool life are required. The uncoated, straight shank design suits standard inch-based tool holders. Machinists and maintenance technicians will find it fits common milling setups.
Suited for ferrous and non-ferrous material removal
The four flute geometry provides a balance of chip evacuation and surface finish for profiling and slotting operations. Shops running high speed steel tools that wear quickly will benefit from the carbide substrate. Buyers who need a larger cutting diameter or a different corner radius for specific fillet requirements should look at other options. This tool does not suit applications requiring reach beyond its 0.625 inch length of cut.
0.1875 inch cutting diameter decides fit
The 0.1875 inch milling diameter is the critical dimension that determines whether this end mill matches the feature size on the print. Verify the required corner radius of 0.01 inch against the blueprint before ordering. The 2 inch overall length and 0.625 inch flute length must also clear the workpiece and fixture. Select this part only when these exact dimensions match the machining program.
Highlights
- 4-flute carbide construction delivers rigid cutting performance
- Corner radius of .01 in strengthens edges for longer tool life
- .1875 in milling diameter suits precision profiling tasks
- .625 in length of cut enables deeper passes in one operation
- 2 in overall length provides reach in standard tool holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
What size collet or holder is required for the 0.1875 in shank?
Use a collet or end-mill holder sized for a 0.1875 in diameter shank; ensure the toolholder runout is minimal to protect the carbide flutes.
How deep should the tool be seated in the holder to avoid vibration?
Insert the shank until the 0.625 in length of cut clears the holder face, then tighten securely; insufficient clamping length causes chatter.
When should the 0.01 in corner radius be considered worn and the cutter replaced?
Replace the end mill when the 0.01 in corner radius shows visible rounding or when surface finish degrades on the workpiece.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
