We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland C61068 carbide end mill, .75 inch diameter, 3 inch overall length, uncoated finish

Cleveland

Cleveland C61068 Carbide End Mill pneumatic accessory

SKU CH-11S9-DQRRB

Carbide milling cutter with a 0.75 in diameter and 1 in cutting length for general-purpose machining

  • TypeMilling
  • Carbide construction resists wear for longer tool life
  • .75 inch milling diameter suits medium-duty cutting tasks
  • One inch length of cut enables deeper passes per operation
  • Three inch overall length fits standard collets and holders
  • Three-quarter inch shank diameter matches common tool-holding systems

Cleveland C61068 Carbide End Mill purpose

The Cleveland C61068 is a carbide end mill designed for general milling tasks in metalworking shops. It suits machinists and fabricators who need a reliable cutting tool for standard operations. The uncoated carbide construction provides hardness for material removal. It is not intended for high-speed machining that demands specialised coatings or coolant-through capabilities.

Sustained load behaviour

Under continuous cutting the uncoated carbide edge retains hardness but generates heat without coolant-through delivery. The straight flute design evacuates chips in a predictable path during extended passes. Operators must manage thermal buildup externally since the tool lacks internal cooling channels. Performance stabilises when feed rates match the tool’s uncoated geometry.

Installation and common issues

The 3/4 in shank fits standard tool holders without adapters, simplifying setup in the machine spindle. A frequent issue arises when runout exceeds holder tolerance, causing premature edge wear. Another common problem is chip packing in deep slots because the straight flutes lack a helix angle to lift swarf. Proper clamping and air blast clearing reduce these risks.

Highlights

  • Carbide construction resists wear for longer tool life
  • .75 inch milling diameter suits medium-duty cutting tasks
  • One inch length of cut enables deeper passes per operation
  • Three inch overall length fits standard collets and holders
  • Three-quarter inch shank diameter matches common tool-holding systems

Specifications

BrandCLEVELAND
TypeMilling

Questions about this item

How much heat does the 0.75 in carbide end mill generate during extended milling sessions?

Carbide construction resists heat buildup better than high-speed steel, and the uncoated surface avoids coating-related thermal insulation during long cuts.

What tool holder or collet is required to run the 3/4 in shank on my milling machine?

A 3/4 in straight-shank collet, end-mill holder or Weldon flat holder matching your spindle taper is needed to secure the 3 in overall length tool.

Will this end mill fit in the same tool changer pockets as my older high-speed steel cutters?

The 3 in overall length and 3/4 in shank diameter match common tooling standards, so it typically occupies the same magazine slots as comparable HSS end mills.

More in Power & Pneumatic Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.