We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland C61038 carbide end mill, 2 flute, 3 inch overall length, 35 degree helix

Cleveland

Cleveland C61038 Carbide End Mill 2FL 3 in 35 deg

SKU CH-7HFJ-4HC4F

Carbide two-flute end mill with a 0.3125-inch diameter and 35-degree helix for milling operations

  • TypeMilling
  • 2-flute carbide end mill for smooth milling
  • 35-degree helix angle improves chip evacuation
  • 3125-inch milling diameter suits fine detail work
  • 125-inch length of cut handles deeper passes
  • 3-inch overall length fits standard tool holders

Cleveland C61038 Carbide End Mill

The Cleveland C61038 is a solid carbide square end mill built for general-purpose milling tasks in a workshop or light production setting. Its two-flute design suits machinists who need efficient chip evacuation in softer materials or non-ferrous metals. The 35-degree helix angle supports a smooth cutting action across a range of speeds.

Uncoated carbide with straight shank

The tool uses an uncoated carbide substrate that resists wear during dry or externally cooled operations. A straight 5/16-inch shank fits standard collets and end-mill holders without requiring specialised adapters. The non-coolant-through body keeps the tool path simple for conventional milling machines.

3-inch overall length with 1.125-inch cut depth

At 3 inches overall, the cutter remains rigid enough for profile and pocket work without excessive overhang. The 1.125-inch length of cut allows deeper passes in a single engagement, reducing cycle time on taller features. Carbide construction maintains edge integrity under normal feed rates and spindle loads.

Highlights

  • 2-flute carbide end mill for smooth milling
  • 35-degree helix angle improves chip evacuation
  • 3125-inch milling diameter suits fine detail work
  • 125-inch length of cut handles deeper passes
  • 3-inch overall length fits standard tool holders

Specifications

BrandCLEVELAND
TypeMilling

Questions about this item

What does the 35-degree helix angle mean for chip evacuation?

The 35-degree helix angle promotes smooth chip evacuation during milling, reducing heat buildup and improving surface finish on the workpiece.

What shank diameter does the C61038 end mill require in a tool holder?

The shank diameter is 5/16 in, so the tool holder or collet must match this size for secure clamping.

How deep can I cut in a single pass with the 1.125 in length of cut?

The 1.125 in length of cut sets the maximum axial depth for a single pass; do not exceed this depth to avoid tool deflection or breakage.

More in Power & Pneumatic Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.