Cleveland
Cleveland C61030 2-Flute Carbide Square End Mill
A 1/4-inch carbide square end mill with a 1.5-inch cutting length for general-purpose milling
- TypeCutting Tools
- Precision cuts with 2-flute carbide design
- 25 in milling diameter for detailed work
- 5 in length of cut handles deep slots
- 4 in overall length gives extended reach
- 1/4 in shank fits standard tool holders
Cleveland C61030 2-Flute Carbide Square End Mill
This carbide square end mill features a .25 inch milling diameter and a 1/4 inch shank diameter. It is designed for general-purpose milling operations in a workshop or light manufacturing setting. The uncoated carbide construction suits users who prefer to apply their own coatings or run specific material strategies.
Installing the 61030 end mill
Secure the 1/4 inch shank firmly in a compatible collet or end mill holder to prevent runout. The straight shank and non-coolant-through design mean standard tool holding applies without additional plumbing. The most common issue is insufficient clamping force leading to tool pull-out or vibration during the 1.5 inch length of cut.
Check your setup before ordering
Verify that your machine spindle accepts a 1/4 inch shank and provides adequate clearance for the 4 inch overall length. Confirm the material you intend to mill is suitable for uncoated carbide tooling. Buyers needing coolant-through capability or a different cutting diameter should select another tool.
Highlights
- Precision cuts with 2-flute carbide design
- 25 in milling diameter for detailed work
- 5 in length of cut handles deep slots
- 4 in overall length gives extended reach
- 1/4 in shank fits standard tool holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Cutting Tools |
Questions about this item
How can I confirm the Cleveland C61030 end mill is cutting correctly after installation?
Check that the 0.25 in diameter carbide flutes produce a smooth, square-bottomed slot at the full 1.5 in length of cut without chatter or excessive heat buildup.
What comes with the Cleveland C61030 end mill and what must I supply?
The package contains the single uncoated carbide square end mill with a 1/4 in shank; you must provide a compatible tool holder, workholding, coolant if desired, and a milling machine.
Which Cleveland C61030 variant should I select for a 1/4 in shank and 1.5 in cutting depth?
The listed C61030 model matches those dimensions exactly — 1/4 in shank diameter, 0.25 in milling diameter, and 1.5 in length of cut — so choose this version.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
