Cleveland
Cleveland C61022 Square End Mill 0.203125 in
Carbide square end mill with a 0.203125 in cutting diameter and 0.625 in length of cut
- TypeCutting Tools
- Carbide construction resists wear for longer tool life
- Two-flute design clears chips efficiently in slotting cuts
- 203125 in diameter suits precise milling tasks
- 625 in length of cut handles shallow pockets
- 1/4 in shank fits standard collets and holders
Cleveland C61022 Square End Mill
The Cleveland C61022 is a 2-flute carbide square end mill designed for general-purpose milling tasks. It suits machinists and fabricators who need a reliable tool for slotting and profiling in a variety of materials. The uncoated carbide substrate provides a sharp edge for clean cuts without coating buildup.
0.203125 in Diameter Capacity
With a milling diameter of 0.203125 in and a length of cut of 0.625 in, this tool handles shallow pockets and slots in softer metals and plastics. The 2 1/2 in overall length and 1/4 in shank fit standard tool holders, though the short flute length limits deep cavity work. It runs out when extended reach or heavy material removal rates are required.
Uncoated Carbide Construction
The uncoated carbide body resists wear during high-speed passes in non-ferrous alloys and composites. Without a coating, the sharp geometry reduces edge buildup on sticky materials like aluminium. Users who need extended tool life in abrasive steels or high-temperature alloys will require a coated alternative.
Highlights
- Carbide construction resists wear for longer tool life
- Two-flute design clears chips efficiently in slotting cuts
- 203125 in diameter suits precise milling tasks
- 625 in length of cut handles shallow pockets
- 1/4 in shank fits standard collets and holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Cutting Tools |
Questions about this item
Will the 1/4 in shank of the C61022 fit the collet on my older benchtop mill?
The end mill has a 1/4 inch shank diameter, which matches the standard collet size on many benchtop milling machines.
How can I confirm the 0.203125 in cutter is performing correctly after installation?
Check for a clean, square-bottomed slot with minimal chatter marks when milling a test piece at appropriate feed rates.
Does the single-end carbide tool come with any protective holder or coating option?
The uncoated carbide end mill is supplied as the cutting tool only; no holder, case or alternative coating is included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
