Cleveland
Cleveland C60932 2-Flute Carbide Ball Nose End Mill
A 0.2031 inch carbide ball nose end mill with two flutes for general-purpose milling
- 2-flute design for smooth contouring and finishing
- 2031 in milling diameter for precise detail work
- Solid carbide construction for hardness and wear resistance
- Uncoated surface suits general-purpose machining on multiple materials
- Single-end ball nose geometry for 3D profiling and pocketing
Cleveland C60932 Ball Nose End Mill
The Cleveland C60932 is a 2-flute carbide ball nose end mill built for general-purpose milling. Its uncoated solid carbide construction provides hardness and wear resistance across a range of materials. The single-end design with a .2031 inch cutting diameter suits contouring, profiling and slotting operations. This cutting tool arrives new and ready for use in CNC or manual machining setups.
Suited for general-purpose contouring and profiling
Machinists needing a .2031 inch ball nose for 3D contour work or radius generation will find this tool matches the specification. The two-flute geometry offers good chip evacuation in softer materials and non-ferrous metals. Shops requiring a coated tool for high-temperature alloys or abrasive composites should select a different end mill. Applications demanding a shank diameter or overall length not listed here will need an alternative cutter.
.2031 inch cutting diameter defines the cut radius
The .2031 inch milling diameter is the single dimension that determines the finished radius and clearance in your program. Verify this exact size against your drawing or CAM setup before ordering. The uncoated carbide substrate performs well in aluminium, plastics and mild steels without the cost of a coating. No other diameter or flute count is offered under this part number.
Highlights
- 2-flute design for smooth contouring and finishing
- 2031 in milling diameter for precise detail work
- Solid carbide construction for hardness and wear resistance
- Uncoated surface suits general-purpose machining on multiple materials
- Single-end ball nose geometry for 3D profiling and pocketing
Specifications
| Brand | CLEVELAND |
|---|
Questions about this item
Should I choose the .2031 in diameter or a different size for my milling job?
The .2031 in milling diameter suits fine-detail profiling and finishing passes where a small-radius ball nose is required; select a larger diameter only when the feature size and machine rigidity allow it.
What does the .2031 in milling diameter mean once the cutter is in the spindle?
It sets the maximum width of cut and the minimum inside corner radius you can produce, so tool paths must be programmed to stay within that envelope for accurate contours.
Is the uncoated carbide substrate compatible with standard ER collets and shrink-fit holders?
Yes, the solid carbide shank fits any correctly sized ER collet or shrink-fit holder, and the uncoated surface works well in aluminium, plastics and non-ferrous materials without built-up edge.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
