Cleveland
Cleveland C60655 End Mill .5 in
A 0.5-inch diameter carbide square end mill with a 1-inch cutting length and 3-inch overall length for general-purpose milling
- TypeCutting Tools
- Precise 0.5 in milling diameter for accurate cuts
- Two-flute carbide design enables efficient chip removal
- Uncoated carbide suits general-purpose machining tasks
- Straight flute geometry provides stable cutting performance
- 1 in length of cut handles deeper slots
Cleveland C60655 Carbide End Mill
The Cleveland C60655 is a solid carbide square end mill designed for general-purpose milling applications. It features a 0.5 inch cutting diameter and a 1 inch length of cut with an overall length of 3 inches. The straight flute geometry and uncoated finish suit a range of machining tasks. The 1/2 inch shank diameter ensures compatibility with standard tool holders.
Machinists needing a straight-flute carbide tool
This end mill suits machinists performing slotting, profiling or plunging cuts where a straight flute design is preferred for chip evacuation in specific materials. It is not intended for operations requiring coolant-through tooling or coated cutting edges for high-heat resistance. Buyers needing a necked tool for deep-reach applications should select a different model.
0.5 inch cutting diameter with 1/2 inch shank
The cutting diameter matches the shank diameter at 0.5 inches, providing a rigid setup for standard milling operations. This 1:1 ratio supports stable performance in general-purpose work without the deflection concerns of smaller shanks on larger cutters. Verify that your machine spindle and holder accommodate a 1/2 inch shank before purchase.
Highlights
- Precise 0.5 in milling diameter for accurate cuts
- Two-flute carbide design enables efficient chip removal
- Uncoated carbide suits general-purpose machining tasks
- Straight flute geometry provides stable cutting performance
- 1 in length of cut handles deeper slots
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Cutting Tools |
Questions about this item
Will the .5 in shank fit the collet on my older Bridgeport mill?
The shank diameter is .5 in, which matches standard 1/2 in collets used on many manual mills.
How can I confirm the carbide flutes are cutting cleanly after I install it?
Listen for a steady, quiet cut and inspect the workpiece for a smooth, square-bottomed slot with no chatter marks.
Does the package include any tool holders or coolant adapters for the non-coolant-through design?
Only the single end mill is supplied; holders and coolant accessories must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
