We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland C60501 carbide square end mill, silver cylindrical tool with fluted cutting end

Cleveland

Cleveland C60501 0.625 in Carbide Square End Mill

SKU CH-SQAJ-TH71B

Carbide square end mill with 0.625 in diameter and 2.5 in length of cut for aluminium machining

  • TypeCutting Tools
  • 2-flute design clears chips efficiently in aluminium
  • 625 in cutting diameter matches common shank sizes
  • 5 in length of cut handles deep pockets
  • Uncoated carbide resists built-up edge on non-ferrous metals
  • Straight shank fits standard ER collets and holders

Cleveland C60501 Carbide End Mill

This Cleveland C60501 is a 2-flute carbide square end mill built for aluminium milling. The uncoated substrate resists built-up edge in non-ferrous alloys and suits CNC operators who need clean finishes on aluminium parts.

Straight shank with 0.625 in diameter

A straight 0.625 in shank fits standard ER collets and Weldon holders without adapters. The 2.5 in length of cut reaches deep pockets while the 5 in overall length clears fixtures on vertical machining centres.

Replaces worn high-speed steel cutters

Shops switching from HSS to carbide gain higher feed rates and longer tool life on aluminium. The upgrade pays off when batch sizes justify the carbide premium and spindle speed supports the recommended surface footage.

Highlights

  • 2-flute design clears chips efficiently in aluminium
  • 625 in cutting diameter matches common shank sizes
  • 5 in length of cut handles deep pockets
  • Uncoated carbide resists built-up edge on non-ferrous metals
  • Straight shank fits standard ER collets and holders

Specifications

BrandCLEVELAND
TypeCutting Tools

Questions about this item

What shank diameter does the Cleveland C60501 end mill use for tool-holder fit?

The shank diameter is 5/8 in, matching standard ER collets and Weldon flats for rigid clamping in milling machines.

What overall length and flute length must the machine envelope accommodate?

Overall length is 5 in with a 2.5 in length of cut, so the spindle travel and workpiece clearance must allow at least that depth.

How is the uncoated carbide cutter installed without damaging the sharp edges?

Insert the 5/8 in shank fully into a clean collet, torque to the holder spec, and avoid side-loading the 0.625 in cutting diameter during tightening.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.