We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland C60281 carbide square end mill, uncoated finish, Weldon flat shank, 11/16 in cut length

Cleveland

Cleveland C60281 Carbide End Mill Square Cut 11/16 in pneumatic accessory

SKU CH-JP8H-FJ6F4

Carbide square end mill with 11/16 in cut length and 0.28125 in diameter for milling applications

  • TypeMilling
  • Square end geometry produces clean corners in milled slots
  • Carbide construction resists wear during high-speed milling
  • 11/16 in length of cut enables deep pocketing passes
  • 3/8 in shank fits standard Weldon tool holders
  • Uncoated carbide suits general-purpose ferrous and non-ferrous milling

Cleveland C60281 Carbide End Mill

The Cleveland C60281 is a square end mill designed for general milling applications. Its carbide construction provides the hardness and wear resistance required for cutting steel, cast iron and non-ferrous alloys. The Weldon flat shank ensures a secure grip in standard tool holders. This accessory suits machinists and maintenance workshops needing a reliable rotary cutter.

Thermals noise and power draw

As a passive cutting tool, the end mill generates no operational noise and draws no electrical power itself. Heat is produced only at the cutting interface during material removal and is managed through standard machining practices such as appropriate speeds, feeds and coolant use. The uncoated carbide substrate handles typical milling temperatures without thermal degradation.

11/16 inch length of cut

The flute length measures 11/16 in (0.6875 in), which determines the maximum depth of cut in a single pass. Buyers needing deeper pockets or longer reach in one operation will find this length restrictive and should consider tooling with a longer flute. The 3/8 in shank diameter fits common holders but limits use in machines requiring larger or smaller shank sizes.

Highlights

  • Square end geometry produces clean corners in milled slots
  • Carbide construction resists wear during high-speed milling
  • 11/16 in length of cut enables deep pocketing passes
  • 3/8 in shank fits standard Weldon tool holders
  • Uncoated carbide suits general-purpose ferrous and non-ferrous milling

Specifications

BrandCLEVELAND
TypeMilling

Questions about this item

How do I install the Cleveland C60281 end mill in a Weldon flat holder, and what step is often missed?

Align the Weldon flat on the 3/8 in shank with the set screw in the holder, then tighten the screw firmly onto the flat surface; the step often missed is verifying the flat seats fully before locking.

What maintenance or replacement will the uncoated carbide end mill need during its service life?

The uncoated carbide cutting edges will dull with use and cannot be recoated; plan to resharpen the 0.28125 in diameter flutes or replace the tool when edge wear affects cut quality.

What limit appears first when running the 11/16 in length of cut continuously in steel?

Heat buildup in the uncoated carbide flutes becomes the limiting factor during sustained cuts, accelerating edge wear and reducing tool life before deflection becomes critical.

More in Power & Pneumatic Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.