Cleveland
Cleveland C60279 4-Flute Carbide Square Double End Mill .25 in .5 in LOC
A 4-flute carbide square double end mill with a .25 in diameter and .5 in length of cut for general-purpose milling
- TypeMilling
- 4-flute carbide design boosts cutting efficiency
- Double-end configuration provides two cutting edges per tool
- 25 in shank diameter fits standard collets
- 5 in length of cut handles shallow milling tasks
- Uncoated bright finish suits general-purpose machining
Cleveland C60279 Double End Mill
The Cleveland C60279 is a 4-flute carbide square double end mill built for general-purpose milling. It suits machinists and maintenance teams who need a replaceable cutting tool for slotting or profiling in a variety of materials. The uncoated carbide substrate handles standard speeds and feeds without requiring specialised coatings. Its double-ended design provides two cutting ends in a single tool holder.
0.25 in diameter with 0.5 in length of cut
The 0.25 inch milling diameter paired with a 0.5 inch length of cut is the primary specification that determines fit for a given feature size. This combination suits shallow pockets, narrow slots and light profiling passes where reach is limited. The straight shank matches the cutting diameter at 1/4 inch for direct collet or holder clamping. No neck relief is present, so deep cavities are not recommended.
Fits 1/4 in holders for two cutting ends
The straight 1/4 inch shank fits standard ER collets, Weldon flats or shrink-fit holders without adapters. Being non-coolant-through, it relies on external flood or mist coolant for chip evacuation and heat control. The bright uncoated finish avoids coating delamination in sticky materials like aluminium or copper. Each tool delivers two usable ends, effectively doubling tool inventory per holder slot.
Highlights
- 4-flute carbide design boosts cutting efficiency
- Double-end configuration provides two cutting edges per tool
- 25 in shank diameter fits standard collets
- 5 in length of cut handles shallow milling tasks
- Uncoated bright finish suits general-purpose machining
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
How much material can the 0.5 inch length of cut remove in a single pass?
The 0.5 inch length of cut sets the maximum axial depth for one pass, so you can remove up to that depth per engagement depending on feed rate and material hardness.
What does the straight shank and lack of coolant-through mean for tool holding and chip evacuation?
The straight 1/4 inch shank fits standard ER collets or Weldon flats without a special holder, and chips must be cleared by external flood coolant or air blast since there are no internal channels.
Will the 2.5 inch overall length and 0.25 inch shank clear my machine's tool changer and work envelope?
At 2.5 inches overall with a 1/4 inch shank, the tool fits most compact CNC magazines and leaves ample stick-out for shallow pockets without hitting the spindle nose.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
